110v

Recent contents Top users
  1. B

    110v sockets

    What tests can you do on 110v sockets?
  2. M

    110v tranny

    Bosch drill stopped working Friday afternoon, one min it was fine the next it wasn't. I've noticed recently that the transformer has been getting really hot when plugged in, even when nothing is plugged into the transformer. So I take the top off and check the voltage going in.... 240 somat...
  3. E

    Evolution SDS4-800 Hammer Drilll 110v

    Evolution SDS4-800 Hammer Drilll 110v | eBay Anyone own one or used one before? Am after a 110v drill with chisel action but dont really use it alot so am a bit reluctant to spend money on one. What do you guys think of this one?
  4. M

    PAT Tester for Testing 110V tools and extension leads

    I've been asked a lot recently about testing 110V appliances, and the best PAT Testers to use. Most people seem to be using a battery powered tester (such as a Seaward PT100 or similar) with a home made adaptor - not ideal. I've just written an article covering the main points and I post the...
  5. T

    110v transformers

    hello all, does anybody know what sort of power factor 110v transformers deal with. would it be a standard 0.85? i want to know what kw output i'd get out of a 3.3kva tranny before i buy it. ta
    • tank
    • Thread
    • 110v maximum rated rating transformers
    • Replies: 7
    • Forum: UK Electrical Forum
  6. S

    Emergency Lighting 110v Pigmy

    Hi All, hope someone can help me out. I am looking at a job just now regading emergency lighting but not sure how the land lies with the regs etc. Currently in is 240v 4ft fluroscents switched on / off as per normal lighting and incorporated into these are 110v(battery bank) 15w pigmy lamps...
  7. C

    Makita 110V drill refurbishment

    A friend gave me an old 110V Makita that needs a new chuck and 'gets a bit hot'. I am going to send it off for refurbishment; can anyone recommend a particular company?
  8. B

    110v Fluorescent Lamps

    Do these light fittings have a different starter to 230v fluoe's?? If they do, does anyone no any information on them?
    • bluearmy
    • Thread
    • 110v fluorescent lamp lamps lighting lights
    • Replies: 4
    • Forum: Australia
  9. J

    110v sockets

    hi ladies and gents. Im currently in the process of fitting out a workshop for the firm i work for. I have a 3.5KVA 415/110v transformer, which feeds a 110v DB (converted 1ph DB). The question i have is regarding cable sizing, and grouping in particular. There are going to be 6 110V sockets...
    • johnboy6083
    • Thread
    • 110v socket sockets
    • Replies: 2
    • Forum: Australia
  10. E

    Fein Multimaster top kit 110v with blades.

    Excellent condition as only used occasionally. Comes with blades, depth stop, dust extraction and sanding pads and hard carry case. Cost me £250 and only selling as i have changed careers. £130 delivered. Please pm your email address if you would like pictures.
  11. K

    installing temporary 110v supply for a transformer

    hi guys could really use some help have been given task on my practical course of installing a temporary supply for a 110 tranny, i am either thinking too much or really thick at getting my head around it, i thought seeing as there is a spare consumer unit in the test rig i would install a 32amp...
    • kyranocat
    • Thread
    • 110v installing radial supply temporary tranny transformer
    • Replies: 13
    • Forum: Australia
  12. R

    110v extension leads

    How do you test a 110v extension lead.We are testing in a very similar way to an iec lead but obviously with 110 v adaptors connected. the result always comes back as a multiple fault on the polarity test.
  13. E

    Makita DA4000LR 110v Angle drill

    Excellent condition, I can honestly say this has drilled less than 100 holes (as I own a protool cordless angle drill which gets used more) Comes in original box with handles etc. If I gave this drill a wipe over I could sell as new it is in great condition. If you have any questions or...
  14. Y

    110v ac coil help

    Hi to all the smarter sparks on here, Can any one answer this question. If a contactor has a 110v ac coil fitted, will it operate when supplied from a 110v cte transformer giving 55v to each side of A1 & A2. I have a feeling it wont so any info would be gratefully recieved. Cheers All Andy
    • yajokinarnya
    • Thread
    • 110v those transformer
    • Replies: 9
    • Forum: Australia
  15. H

    Would a 220V RCD/ELCB trip in 110V?

    here in where I work, the most common 1-phase power comes in 220V, so therefore I bet most of the 1-phase circuit protection devices sold here are for 220V. Very few of them indicates specifically that they can operate in 220V or 110V system, while the others don't say anything at all. My...
  16. I

    12v DC to240v AC to 110v AC

    I am wanting to run a usa knife sharpener 110volts AC in an Australian car. Is there a problem using an inverter 12v DC to 240 vAC and then a transformer from 240 to 110 AC? I am advised the sharpener needs a min of 120W and the inverter I have supplies 200W
    • ian murray
    • Thread
    • 110v 12v
    • Replies: 3
    • Forum: Australia
  17. P

    Strange lighting fault 110v?

    Got a call on thursday asking if I could call around, light in one of the bedrooms not working. No prob's I thought, probibly something simple, wire come loose etc. Got there and found nothing between L-N and 110v between L-E. The light is not at the end of the radial (has a loop in and out)...
    • Ponty Massive
    • Thread
    • 110v fault lighting strange
    • Replies: 1
    • Forum: Australia
  18. L

    220v Motor 110v Plug Fitted- PLEASE HELP!!

    Hi all, am onsite plumbers are flushing out system using a 220v motor. With a 110v Commando Plug Fitted.<br><br>They are complaining about Tranny overheating! But don't wanna put a 1362 on as HSE Training has&nbsp;convinced&nbsp;them 110v not RCD protected 1362.<br><br>Anyone fresh with motors...
    • LOYDE
    • Thread
    • 110v 220v fitted motor please plug tranny
    • Replies: 13
    • Forum: Australia
  19. N

    IR test on 110v emergency lighting circuit

    Could anyone please advise on a IR (250V) reading of 0.02MΩ on the permanent live of an emergency lighting circuit to earth ONLY. Lamps have being removed, but ballasts and batteries are still in circuit? The breaker is mechanically sound and stays on with this apparent dead short to earth...
  20. C

    Modding 110V appliance to 110-240 compatible

    Hello everyone, Let me preface by admitting that I'm not a professional electrician. My apologies if I'm intruding, but I didn't know where else to go to answer this question. That being said, I'm curious to know if it's possible to modify/convert an appliance that was before only 110v/60Hz to...
    • Chris Hill
    • Thread
    • 110v appliance compatible pat pat testing
    • Replies: 1
    • Forum: Australia

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electric Underfloor Heating Electrician Courses Heating 2 Go Electrician Workwear Supplier
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.

Advert

Tilers | UK Tiling Forum | Tilers Forums | Find a Tiler
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Gas Forum | Unofficial Gas Safe Register Forum
Workwear Shropshire
Top Bottom
Back