code

  1. D

    12v PIR -- CODE SL099 - -FORMERLEY MADE BY SMITHS/TIMEGUARD

    I need to replace some 12v outdoor PIR`s formerly made by Smiths, then Timeguard. The CODE is SL099 easily found on Google. However, they are nowhere to be had as they have been discontinued. They send a signal to the mains control box (CODE SL055) which controls up to 3000W of lighting and...
  2. G

    code query.

    A 20 room accomodation block, built 1970s main incoming water is pvc. Which then changes to copper. No evidence of a main equipotential bonding conductor leaving the main db or anywere bonded at main incoming location. Continuity check <0.02 Ohms. Would you f/I this?. So then shower rooms have...
  3. yellowvanman

    How would you code this?

    Plug supplies the gas ignition. Cooker switch supplies oven on a 1.5mm flex. All on a 30A BS3036 fuse Both flexes are routed behind the tiles. The cable is not damaged or brittle and the faceplate is not charred through previous cable damage (I think). As it'll be me trying to rectify this my...
  4. M

    Would you code a 60 amp main switch been fed from a 100 amp BS1361

    I carried out a EICR and the main switch for the consumer unit is only rated at 60 amps and the main supply fuse is a BS1361 rated at 100 amps. Im thinking this should be a C2, what are your thoughts please. Many thanks Martin
  5. V

    bathroom light code?

    Hi Guys, I have a Question: If there is a batten lamp holder with a 60W bc lamp in it, at a hight of 2.6 meters in a bathroom. What code should it be? :whatchutalkingabout
  6. S

    Megger fault code

    Hi does any one know what e37 means on a megger insulation tester ??
  7. B

    cable outside zone. is it a big deal? EICR code?

    A 10mm cable supplying shower is chased down the bathroom wall (in correct zone) and is then chased from celing height down the wall in the kitchen below. The cable pops out of the kitchen wall below contertop level making the rest of the journed to the CU on the surface but cannot be seen...
  8. M

    Rewirable fuses date, code

    1. Hi can you please tell me when rewirable fuses in consumer units were phased out. 2. A spotlight bar is fitted to ceiling with original ceiling rose base pushed up into void between ceiling and floor boards. Code C2? Thank you
  9. J

    EICR code for non metal fuseboard

    Hi all Does anyone know what code on an EICR we are to use for a non metal fuseboard in a dometic premises? Thanks

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock