Hi.
I live in Kurdistan(iraq). I bought these four devices from the United States:
@BLENDER: 120V, 50/60Hz, 12A
@food dehydrator: 115V,50/60Hz,600W
@food dehydrator: 110V, 60Hz, 1500W
@Vacuum sealer: 120V, 60Hz, 1.06A
As you know Iraq's power is 230V-50Hz, So I have to change the voltage...
I have 18 panels in 2 strings (37.8v open circuit voltage each) to be connected to a Fox H1 inverter. The manual says the below. Is the 600v open circuit voltage per string or for both strings combined?
H1 series inverters can be connected with 2-strings of PV modules. Please select suitable PV...
A friend of mine asked me to look at here PV system as she is not getting any power (and thus money) from it. First real issue is the Aurora inverter has a E031 fault which I suspect is burnt out relays, so I can probably fix that with a big iron and a couple of new relays (at last for another...
I'm considering buying a home battery storage solution and read that with 3kWh feed you can only charge 12kW during the 4 hour Octopus Go off-peak window, which makes sense.
Is it the mains supply, battery or inverter that bottlenecks this 3kWh? I've read some batteries (or was it inverters?!)...
I have the following batteries I need to connect to this inverter: https://www.amazon.com/gp/product/B09L89LW3P https://www.amazon.com/gp/product/B08YDQSDC4. I need to set the two batteries up in a series. I watched a few videos, and see you should attach the positive terminal first, then...
I have a 4kw system and a Solic 200 installed - all good since installation.
I had a Solis inverter and Pylontech battery installed, but the Solic and Inverter do not work together! The Solic boost button does not work and I have the warning lights.
I had hoped and asked the installer that if...
Hi all, and thanks in advance for any help that can be given.
I had a call out to a factory the other day to connect a new motor the maintenance guy had installed, he said the old one had given up. When I got there I connected it up, and it ran for a bit then stopped. After questioning the guy...
Hi,
I have got this DC to AC power inverter that draws excessive amount of power when I start up a motor.
The motor is a 1300W one and my other inverter draws 1800W on start up, the one with a problem takes 3200W.
It's a low frequency inverter with simple power board and a large coil. I have...
Hi,
I am doing a self build campervan conversion and currently in the process of doing the electrics.
I'm confident with the 12v circuit design but after some advice on the 230V.
I have 200aH AGM batteries at 12V then a 600W inverter. Plan is to fuse the 12v positive lead input to the...
We plan to upgrade our 500w inverter to a 3000w inverter in order to accommodate a .75hp water pump (used only three times per week for 20mins), a small fridge and a couple of standing fans. We currently have 4 x 120w solar panels, 2 x 24v batteries and a Vitron Blue Solar MPPT 100/50 charge...
I have a Samlex 600 Watt PSW AC inverter. The inverter connects to the battery source by way of the positive and negative clamps from the back of the inverter. I have isolated it away from all connections. It is connected to the 12 volt battery only. It beeps.
Presently, the battery voltage...
I'm hoping someone out there has come across this problem.
Just had -8 days ago- a 6k solar panel system plus 4.8k battery pack installed.
When the electrician left the batteries showed 20%full.
Next few days inverter showed producing 30kwh but batteries did not charge.
We normally use 8.5kwh...
hi all new here :) right so am upgrading my inverter set up in my work van i use this set up for tools and camping the new inverter going in is a
Victron Phoenix Inverter 12V 2000Va Smart what i am trying to work out is will i need to run it in to a 240v consumer unit RCD /MCB. my old ivereter...
Hi all
I hope everyone is doing well.
I have a new rural small house coming up that I need to use generator power for.
It's 105 sqm and the time and cost to get connected to the grid need to be pushed out for me. (1-2 years)
Has anyone any experience with some type of battery connected to a...
Firstly Thank You for the opportunity to join your forum.
I have just bought a Steca (Studer) XPC 2200- 24 inverter second hand for my 24 volt solar system .
When I wired it up and turned it on with AC in and out connected the AC present light was flashing which means suitable AC is not...
Hi Guys,
Thanks for the add, got a reasonable understanding but motors ant my thing.
Trying to run a 3kw 3ph motor on a Alan Bradley Inverter that I Have had for a few years.
It isn't happening on load so 3000/240 is 12.5A this total so 4A per phase?
So the AB is rated at 230v 12A is 2760 or...
Hi, I’m just wondering if its theoretically speaking possibly to start your PV system and inverter when its power failure ? And its not hybrid inverters with a backup system.
I’m thinking the following things to start a Inverter during a power failure
You put of the setting at the...
I've been trying to find out what is up with my mother's solar panel system - as a DIYer, I'm comfortable with domestic electrics but have no experience of solar PV systems. The inverter won't start up and is displaying the error 'FE not connected' which according to the manual means protective...
Hello, I have a refrigerant recycling machine in my work van and don't want to run an extension cord from a customers house to the machine in my van, what size inverter do I need to run the recycling machine safely?
Post in thread 'Domestic - 4 or 5 pin plugs for 3 phase supply from inverter?' by pgrbff has been reported by James. Reason given:
Content being reported:
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc