Aico vs FireAngel with app notifications

[cliffed]

Unanimous.

Out of curiosity, £900 just for aico materials? How many detectors is that?
Granted, I don’t know how much the hub thing is.

You say “each alarm requires an rf module”
Do they? If they’re hard wired?
Is this so the app knows which detector has gone off?

Always try & hard wire… it’s so easy not too, but pain if they play up

 

[pc1966]

Always try & hard wire… it’s so easy not too, but pain if they play up

If you are rewiring anyway then probably cheaper on top.

But for retrofitting without easey cable routing then the Aico ones at least seem to work well and the "remote control" module to test/silence is such a God send when it comes to folks setting them off due to dumb things (smoky candles in living room, etc) without getting A&E involved due to falling off ladders trying to silence ones on a 10' or 12' high ceiling.

 

[chriso]

Unanimous.

Out of curiosity, £900 just for aico materials? How many detectors is that?
Granted, I don’t know how much the hub thing is.

You say “each alarm requires an rf module”
Do they? If they’re hard wired?
Is this so the app knows which detector has gone off?

3 heat alarms, 2 smoke alarms, 1 carbon alarm.

Yes, if you want to communicate with the gateway and outside world, each one needs a rf module installed, which is £55. Its not clear if they have an app or just sms/email notifications.

Screenshot attached.

 

[Midwest]

I swopped my smoke alarms to Aico recently, and was going to have rf module, so I could use the app. Perhaps a landlord might benefit from the use of the app, but not sure what a homeowner would gain?

Another vote for the remote control, which you can get as a hard wired one.

 

[Dobes_88]

I've previously installed Aico detectors and integrated them with a Texecom intruder alarm system via a relay base (Ei128R) for notifications through the Texecom app, an option to look into if you're just after notifications whether they've activated or not.

 

[nicebutdim]

If you are rewiring anyway then probably cheaper on top.

That would have been my first suggestion, but marketing info for Aico's SmartLink Gateway states that it's for use with RF devices. I suspect this means it will only communicate with heads that are fitted with RF modules, but would suggest OP confirms this with Aico. Money to be saved if they could get away with only one RF module, but I don't think they can.


Edit: should have finished reading the thread before responding as OP confirmed my suspicion in post #13.

 

[pc1966]

That would have been my first suggestion, but marketing info for Aico's SmartLink Gateway states that it's for use with RF devices. I suspect this means it will only communicate with heads that are fitted with RF modules, but would suggest OP confirms this with Aico. Money to be saved if they could get away with only one RF module, but I don't think they can.


Edit: should have finished reading the thread before responding as OP confirmed my suspicion in post #13.

I think you would only need one RF & mains base to allow the radio link, all alarms could be hard-wired sort. But not something I have actually looked in to in any detail, but did fir two mains and 3 radio devices to a friend's using that approach.

 

[chriso]

Hmm, so the SmarkLink app looks like its just for installers?

‎SmartLINK

‎Ei Electronics SmartLINK app is designed to work with the Ei1000G gateway and SmartLINK cloud portal installation. This app guides installers through the process of installing Ei Electronics alarms and allows the install data to be pushed to the SmartLink Cloud Portal providing a complete...

apps.apple.com

Looking at the screenshot and description. Its also all 1 star reviews saying you can't login, with them responding

"Thanks for your feedback. The SmartLINK App is designed for users with existing log-in details provided to them by their SmartLINK Portal system administrator. If you do not have log-in details for the SmartLINK App, contact your administrator"

It doesn't look like it lets you see an alarm and the status. Not very clear.

Compared to the Nest app which does show you alerts and system status

‎Nest

‎At Google Nest, we make products that are beautiful, helpful and easy to use. The Nest app is no exception. Control your Nest thermostat, arm and disarm your Nest Secure alarm system, see your home with Nest Cam, and get an alert if Nest Protect goes off – all in one place. And receive...

apps.apple.com

 

[WallaceP]

I can't see much utility in having an app alert you if there is a problem, I have never used the Aico Gateway myself but I could see the information it sends out being rather limited. You might be cheaper with a hardwired aico system and maybe a nest alarm in the hall, in addition to the aico system?

 

[chriso]

I can't see much utility in having an app alert you if there is a problem

If there is a fire and we are away from home, I get an alert and can call the firebrigade and neighbours, rather than waiting for a neighbour to spot it.

I'm not asking whether or not I should have internet connected smart alarms, I'm trying to work out if Aico, the brand all the electricians have recommended, have their tech together with this stuff.