Discuss barge wiring in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

A

adamh

has any1 ever wired up a barge before? lol my uncle has bought 1 and apparently its had a load of water in it so no power i was gonna start off with an insulation ressistance test on all the cables and then i need to replace the invertor/transformer i guess any1 know a website or decent wholesalers to get 1. i'm assuming it will have a few batterys connected to the alternator then off to the invertor and finally the DB sound right? any info appreciated thanks adam :)
 
Have been involved with a few houseboats and their problems. am a firm believer in only using 110v on boats as damp is always present and a shocking surprise is always better than getting dead.:eek:

Wooden or Steel hulls are always damp as wood needs to stay wet to stay watertight and steel causes condensation like crazy. General rules are that the system is totally insulated (inc. Earth) and that anything that is earthed should not be fixed directly to the hull.

Preference is for a dual system with battery voltage, usually 12v or 24v dc for lighting and a small donkey engine driving a 110v genny for the power while charging the batteries through a charger.. Standard inverters have a poor survival rate on boats, particularly where sea water is about and are a pretty inefficient method of producing mains power. Typical rate of 80amps from a 12v battery to produce 3a at 230v (inc. losses).

Emergency lighting florescents can be rewired to run from various voltage tappings from the battery if you get batteries with the external connectors between cells.:)
 
good points but im sure he would need a 230 volt supply for a tv etc?
 
Most TVs and a lot of other appliances work on 110v. They're made to work on the US system as well as ours. A bunch of flat screens also run on 12vDC.
 
i dont know what the regs are for boats in the uk
but I would think that you would want to make as much of the electrical system water tight as possible
and as much as you can with low voltage (12 and 24 volt dc)
 
i dont know what the regs are for boats in the uk
but I would think that you would want to make as much of the electrical system water tight as possible
and as much as you can with low voltage (12 and 24 volt dc)

5 years for these pearls of wisdom.
 
Didn't see the date of the post had more than a few pints last night
Hell of a hangover this morning
 

Reply to barge wiring in the Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock