The voltage provided to a car's ignition coil whilst cranking is less than the nominal battery voltage of 12 volts due to the high current drain to the starter. That may be as low as 8 volts so the ignition coil is rated at 8 volts. Once the engine fires, the terminal voltage rises back to the nominal 12 volts which is too much for the coil so a ballast resistor is switched in to reduce the coil voltage to its rated 8 volts. All well and good.
Bosch market an ignition coil called a "Blue Bosch" which has an internal ballast resistor.
Please help me to understand how that works - how is the ballast switched in/out? Is there some voltage sensitive device within the coil? Zener diode? A circuit diagram would assist.
Thanks.
Bosch market an ignition coil called a "Blue Bosch" which has an internal ballast resistor.
Please help me to understand how that works - how is the ballast switched in/out? Is there some voltage sensitive device within the coil? Zener diode? A circuit diagram would assist.
Thanks.