UK Can you settle an argument please?

[Rigpig]

Double insulated cable, 2nd layer is fibre( see attachment) I am working with a more experienced domestic Electrician today. The upstairs lighting circuit is wired in singles in the above cable. It is a neat job but no containment. My experience is almost all industrial. Is this acceptable? He reckons that as it was acceptable when the job was done we should just leave it. Our work is only to change the light fittings. Sorry for the long winded message and thanks for any replies, sensible or otherwise?

 

[Wilko]

Hi - I’m unfamiliar with the cable, so my concern would be whether it has a BS approval and what it’s rated.

 

[Rigpig]

Hi - I’m unfamiliar with the cable, so my concern would be whether it has a BS approval and what it’s rated.

Thanks for the reply mate. I have seen it used before to wire 3 phase ovens internally..... Cannae be for houses surely??

 

[Robson689]

Looks like this

Glass fibre high temperature cable to 108 degrees

Glass fibre high temperature cable to 108 degrees C glass insulated lighting flex

www.batt.co.uk

 

[westward10]

Is your pic an actual image taken of it on site.
[automerge]1583934891[/automerge]
Is the inner white insulation plastic or rubber, looks plastic.

 

[Rigpig]

Is your pic an actual image taken of it on site.

Yep, sure is, bloke I am with wants to leave it as is?? Might take a picture of the clipping as someone clearly took time over it. Very neat but looks wrong as feck...
[automerge]1583934890[/automerge]

Looks like this

Glass fibre high temperature cable to 108 degrees

Glass fibre high temperature cable to 108 degrees C glass insulated lighting flex

www.batt.co.uk

Thanks , that looks like it

 

[Pete999]

Double insulated cable, 2nd layer is fibre( see attachment) I am working with a more experienced domestic Electrician today. The upstairs lighting circuit is wired in singles in the above cable. It is a neat job but no containment. My experience is almost all industrial. Is this acceptable? He reckons that as it was acceptable when the job was done we should just leave it. Our work is only to change the light fittings. Sorry for the long winded message and thanks for any replies, sensible or otherwise?

Does it test OK?

 

[westward10]

What is being used for a cpc.

 

[Rigpig]

Does it test OK?

Good point chief. I will break out the martindale...
[automerge]1583936623[/automerge]

What is being used for a cpc.

Same stuff...... This place must have belonged to a diy dave.....
[automerge]1583936986[/automerge]

Good point chief. I will break out the martindale...
[automerge]1583936623[/automerge]

Same stuff...... This place must have belonged to a diy dave.....

He has relented It is all coming out and we are gonna do it properly ? thanks for everyone's input

 

[davesparks]

That looks like high temperature singles used inside ovens etc.
It must be installed within some form of containment and is not suitable for use clipped direct etc.