Cordless driver

[Robotstar5]

I got a little Bosch IXO a couple of years ago, only 3.6V but small and light. It will drive up to 4mm screws but I normally use it for panels/covers, has a standard hex drive.

 

[amlu]

bosch 10.8v

 

[YoungBart]

I bought a Milwaukee 12v kit from Anglia tool center, £160 for driver, torch and recipricating saw. All are brilliant, would definately reccomend them.

 

[Guest123]

I have this kit and it really is very good.


DeWalt DCZ 211 S2R 10.8v Compact Cordless Drill Driver + Impact Driver + 2 Lithium Batteries 1.5ah : Tooled-Up.com

 

[The Finch]

I have this kit and it really is very good.


DeWalt DCZ 211 S2R 10.8v Compact Cordless Drill Driver + Impact Driver + 2 Lithium Batteries 1.5ah : Tooled-Up.com

Doesn't look bad at all that


Sent from my iPhone using Tapatalk

 

[The Finch]

I got a little Bosch IXO a couple of years ago, only 3.6V but small and light. It will drive up to 4mm screws but I normally use it for panels/covers, has a standard hex drive.

Seen them today in homebase £30


Sent from my iPhone using Tapatalk

 

[Guest123]

Doesn't look bad at all that


Sent from my iPhone using Tapatalk

Have to say, I was a bit sceptical as they're only 10.8V but I didn't need to be as they are as good as any 12 or 14V tool out there IMO.

Just be aware, the 1st gen of these came in a cloth bag with 1.3AH batteries whilst the ones in the link that I have come in a better carry case and have the uprated 1.5AH batteries.

 

[mayfair]

I like this one lol. http://www.amazon.co.uk/Bosch-Cordl...C0/ref=sr_1_10?ie=UTF8&qid=1347047391&sr=8-10

 

[robskiing]

Electric centre coventry are doing the 10.8v lithium drill driver impact driver and torch with 3 batteries for £143 + vat which I thought was very good I use them every day worth it regardless what the price is

 

[Rampage]

I've just bought one of these from Selco for £120 inc. It came with 3 batteries and I'm very very pleased with it.
I'm not sure if the offer is still on now though.

Just to update. I've been leaving this at work and have had to use it a few times. It's been used for drilling through wall tiles to mount a surface mount box and also drill 5mm holes in stainless steel sheet. Both times it has performed very well and surprised me!