data termination tools

[Thomas123]

I've been looking everywhere on the net for crimpers that crimp ITT cannon rj45 modules, not the clear plugs, but what the clear plugs slot into. http://in.rsdelivers.com/product/it...ket-fascia-shielded-panel/0839561.aspx#header Also, can anyone recommend me a punch down tool? will the cheap ones do the job? I also need a basic cable tester. cheers

 

[pennywise]

Paladin make some really good punch down tools, not cheap but very solid build, fluke also do a good one or if cost is king krone

 

[telectrix]

basic cable testers on ebay for under a tenner. not the sort you need for industrial testing , but good enough to prove continuity and correct terminations.

 

[bugsy]

get it all from scewfix , tester won't test transmission speeds but then again do you want to part with few hundred quid

 

[rick]

Punch Down Tools - 110 Termination Tool - IT Tools crimp cable cutters crimpers satellite testers modular punch down and cimp tools for IT

With Krone blade option, top quality

Re. tester, depends how much you want to pay. A proper network analyser which will test crosstalk, skew, etc. and can be used to verify a cabling installation will perform as required is very expensive, and probably best to hire unless you are going to use it a lot, and you will need to read up on how it works and understand what the results mean. Simple screwfix type tester cheap as chips but only tests you've wired it right. Middle of the road would be something like this:

Test-Um NT750 LanScaper Network Testing Kit Test-Um NT750, NT-750, NT 750

^ I have this and it is very good. Includes tone generator and probe.

HTH

 

[deltacabling]

Hi, (first post so hello!)

What you need is a 3 in 1 ITT/Nexans 808 crimp tool. (The terminations are known in the trade as 808's). This will form the pairs and crimp the termination. It will also do the ITT/Nexans Shielded Terms.

AX Distribution - Nexans LanConnect
Netcomp Ltd - ITT Cat5e 808 cabling

HTH