Maglock releasing

[gavin.sibley]

Hello all,

Need some help with a door entry system, Basically I have two seperate door entry systems and I need them too release one Maglock, but obviously although both systems are releasing (I.e turning off the 12v to Maglock) the other system will still hold it closed. Any ideas?

Cheers,
Gavin

 

[ImpededLoop]

Wire them in series. You may need to use a relay - don't put the two 12V outputs in series.

 

[tazz]

As Above...both access units have built in relays, Wire the maglock in series through each access relay.