Starting out tools list

[Pete999]

Don't think they'd invented zips then. Most likely buttons only. :wheelchair: :smile5:


I agree that the CK bag is good to work out of. I have my regularly used tools in one and it's easy to find a specific tool and better than a toolbox for spotting whether tools are missing when packing up.

Listen up you bunch of Divs I'll have you know, nah I aint going to stoop so low lol

 

[Adam W]

A lot of electricians make do with the minimum, these are usually the ones that are the first to take the mick on how much you spend on tools, and the first to ask to borrow them. Invest in them and don't lend out I've lost count on the amount of shifters I've had returned yet I haven't seen them again.

An electrician should have the tools he needs, but for an apprentice starting out, 'the minimum' is fine. I started out with 'the minimum' and went out and bought a tool every time I had to borrow one. That way you get a feel for what are the essential tools, and what amount to gimmicky ballast in your tool bag.

Conduit cutters, SWA bladerunners, full sized rods, socket and spanner sets, MCB screwdrivers and such like may be useful if you're doing a lot of work which uses them, but you can live without them.

 

[ruston]

Two quality pair (minimum)of 'Vice' grips are a God send. Long nose and standard.
Maybe not at apprentice stage , but you will never regret buying them.

 

[nunthe wiser]

When I said minimum I was referring to shankys post on how, sparks of ten years service not knowing of some of the tools he was using . I wasn't suggesting an apprentice should have a full tool kit, straight off the bat. Does the jib handbook have a tool list in it?.The sjib handbook did, giving an idea of what apprentices should have at the end of each year. Tool kit will take a while to build up on apprentice wages.

 

[shanky887614]

When I said minimum I was referring to shankys post on how, sparks of ten years service not knowing of some of the tools he was using . I wasn't suggesting an apprentice should have a full tool kit, straight off the bat. Does the jib handbook have a tool list in it?.The sjib handbook did, giving an idea of what apprentices should have at the end of each year. Tool kit will take a while to build up on apprentice wages.

nun is right, im sure most here will agree there tool kit would cost way over a grand to replace, way to much for an apprentice to buy.



Sent from my SM-G900F using Tapatalk

 

[ruston]

Yes , a lot more than an Iphone and all the other electronic gadgets that are a must these days.

 

[7029 dave]

IMO, all you need starting out is good quality hand tools, in a tool bag/box of your choice. I was a great believer in a nice canvas tool bag, several which I still have to this day. ( new ones) lol