Discuss Terminal Identification in the Australia area at ElectriciansForums.net

I've found out what type they are, but to get a larger size cable entry, the modules are larger. Not sure I want to do that, so I could add a couple more and redistribute the cables: one set have 5 x 1.5mm flex in them! (not shown in these photos). Then I run out of room on the rail, so do they have to have the end backets?
 
Last edited by a moderator:
I've found out what type they are, but to get a larger size cable entry, the modules are larger. Not sure I want to do that, so I could add a couple more and redistribute the cables: one set have 5 x 1.5mm flex in them! (not shown in these photos). Then I run out of room on the rail, so do they have to have the end backets?

You can get different types that are same physical footprint, have you got the dimensions you want to be close to? :)
 
I've found out what type they are, but to get a larger size cable entry, the modules are larger. Not sure I want to do that, so I could add a couple more and redistribute the cables: one set have 5 x 1.5mm flex in them! (not shown in these photos). Then I run out of room on the rail, so do they have to have the end backets?

Not the best of practices but If the earth terminals clamp to the rail using a centre screw then they can act as end stops, from memory some phoenix et's grip the rail with a spring type action so will restrict movement.
 
Why is life so complicated! I've found the items I want (see below), but now I can't find anywhere that will sell them singly.

Any suggestions?

Phoenix Contact
1 x 3003347 UK 2,5 N
1 x 3003350 UK 2,5 N BU
2 x 0441119 USLKG 2,5 N

 
Why is life so complicated! I've found the items I want (see below), but now I can't find anywhere that will sell them singly.

Any suggestions?

Phoenix Contact
1 x 3003347 UK 2,5 N
1 x 3003350 UK 2,5 N BU
2 x 0441119 USLKG 2,5 N

I have made a phone call waiting on result ill let you know when i do :)
 

Reply to Terminal Identification in the Australia area at ElectriciansForums.net

Similar Threads

Hi, I've bought a "yagusmart" smart switch from Amazon and it has no earth terminal. Although there are no metal facing parts I would think the...
Replies
2
Views
518
Hi all, I am about to fit a light fitting and wanted some advice whether I should just connect the light cables into the correct terminal blocks...
Replies
2
Views
553
Hi guys - wanting some nylon terminals for a toggle switch but the connectors are curved above the screw - can anyone tell me the the type of...
Replies
2
Views
639
Hi, my CDA FWC303 wine fridge is knackered. The compressor doesn't start and I've traced it to the PTC which I plan to replace and have identified...
Replies
2
Views
569
I recently purchased a rural property in Arizona. The property receives power from APS, the local electric utility. Power arrives from the...
Replies
3
Views
800

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock