am2

Recent contents Top users
  1. S

    Am2 question on bonding and ir test

    Hi, I have a couple of questions from the am2. The install bays have the cutout fuses in a adaptable box with just a banana plug on the earth. This then acts as the met up in the cu, should I disconnect at the cu and test down to the banana plug for continuity, like for the main bonding? Or keep...
  2. J

    AM2 NET Marking System?

    Yo I recently sat my am2 this week and I am awaiting my results this week, just wondering how stringent NET are with the marking side of things, is each segment passed on a percentage (say 80%) or is a 100% required throughout. Thanks in advance ⚡️
  3. S

    AM2 pre training private course

    Hi, Does anyone teach pre AM2 type of exam course in London? With your rigs etc? Basically to get idea what it will be like. Thanks
  4. A

    AM2, how stringent is the marking criteria?

    Hi, I’ve recently completed my AM2s exam and am now awaiting results. I have a question regarding the testing & inspection section, the final page of the paperwork for it was a ‘verification page’ one of the questions on there was ‘what is the maximum operation time for an RCD at 1x the...
  5. R

    motor overload for am2 need help!!!!

    Hi everyone, I’m doing my am2 and can’t seem to find a definite calculation to working out the overload this equation I = P/V/1.73/0.8 has popped up but not sure if it is correct
  6. A

    Failed my AM2 fault finding 3 times….please help!?!?

    Failed AM2 Fault Finding 3 times!!! hope somebody can help me, I’ve spoken with the examiner, he said my fault finding itself is fine it’s just my writing/explanation. Can someone give me some examples of what to write so I can pass it this time!? Thanks
  7. T

    AM2 advice failed safe isolation

    Hi I am looking for advice please. Last week I done my am2. And the only thing I failed on was safe isolation of the 3 phase circuit. The assessor told me to safely isolate the 3 phase isolator. So I turned of the isolator put a lock and tag on and put the key in my pocket. I then...
  8. N

    AM2 fail help cat5 data

    Hi guys and girls, I recently failed part of my AM2 assessment on the cat5 data part of all things! Any help would be much appreciated. Problem is I don’t know where I went wrong. Here’s a quick run down. Cable installed in top or bottom of dado with the plastic bridge fitted where it...
  9. S

    AM2 global IR testing

    When doing the IR testing in the AM2 is it acceptable to carry out a global IR test? Or each circuit individually?
  10. J

    Passed my AM2 - Ask me anything !!

    Recently passed my AM2 exam first time. Ask me any questions and I’ll be happy to answer them !
  11. S

    How did i fail on zs in am2?

    Hi all, I done my am2 and passed everything except testing and inspect, i failed on Zs (earth fault loop impedence). It says I did not correctly obtain the value in accordance to guidance note 3, but I did zs=ze+r1+r2. Just wondering if anyone knows where I could have gone wrong?. Thanks.
  12. 7

    2365 almost complete questions about am2 /nvq

    level 3 2365 almost complete .Can i take the Am2 before signing up for nvq Whats the rules guys for doing the AM2 can i complete the am2 then do the nvq cheers for your guidance
  13. S

    Am2, what size cable for the heating system

    Hi everyone I have my am2 resit coming up and was wondering what size cable do you use from the wiring centre, to the programmer, and what size cable is used from the wiring centre to the thermostat. I thought it was 1.5, but wasn't sure. Any answers will be much appreciated, thanks a lot.
  14. XS Training

    New London/Essex AM2 Centre

    There is now a new AM2 centre in Woodford Green offering AM2, AM2E and AM2S. Free parking and close to London tube/train stations. Further details can be found at the following link WOODFORD GREEN AM2 CENTRE - https://londonessexelectrical.co.uk/contact-us
  15. C

    AM2 online exam!!!!

    Hi I have my AM2 booked for first week in feb does anyone one know the best way for revising for online exam as I passed everything g else
  16. T

    Am2 Testing tomorrow need help with the sheet.

    Hi I’m doing my am2 testing side tomorrow. Does anyone know where to find the max Zs values in guidance note 3 Also they have started doing 3/4 questions at the end of the testing does anyone know where they are. I’m also looking for how to find the max tripping times on RCDs
  17. R

    AM2 exam help!

    Hi all! Hope everyone is well! Does anyone have any tips or pointers for the AM2 exam? I have my exam in a months time and am very nervous!
  18. M

    Failed am2 on swa circuit?

    Hi all, I recently failed my installation of swa cable and TP&N socket outlet and not sure why. Passed the rest. Any advice, It says: -did not complete connections/terminations to industry standards -identification/labelling to the required standard.
  19. Kuba

    AM2 complete

    Today I got results back from my college and I completed my AM2 with a 98.4% pass mark ? Absolutely gobsmacked! Thanks to everyone on this forum who helped me with my previous posts. If you are preparing for it feel free to ask me any questions and I’d be more than happy to help ?
  20. K

    AM2 testing phase rotation

    doing my am2 this week and forgot to ask at my prep day about phase rotation, will I need to do it on the incoming supply also will I need to it anything else like the motor or three phase commando socket don't touch 3Phase a lot so abit unsure

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock