Hello,
I have my practical 2391 test on Friday and have been told by the examiner that we will be required to complete the calcuation for the maximum operating temperature for Zs. I am unsuse what to do with the calculation.
From guidance notes three (second example down, pg 113), it...
All I know about this thermostat is that it is inline, and has a couple of indicator lights on it, the purpose of which I do not understand. This photo shows heat traced pipe, I think.
If it is known hereabouts on the forum, is there an opinion on its reliability and durability at all? Anyone...
Discharged
Thread
below
cable
please
temperature
termostat
thermostat
trace
Hi Peeps
I have my 2391 coming up in October and I am busy revising.
When determing the circuit length and VD, my notes say to link L - N at the load side and take the loop resistance at the DB.
The example I have is : Loop Resistance = 0.7 ohms (R) and csa of cable = 1mm2 (S), calculate the...
Mark.W
Thread
cable
circuit
example
length
resistance
temperature
Hi,
Sorry if I opened the thread in wrong forum.
I am about to use a thermostat for Homemade Incubator and I recently got Carel IR32V1L000 Thermostat with PT100.
There is an instruction, but I cannot set it to work as I want. (which is it should switch the heather off when the temperature...
moulie18
Thread
heating
problem
reverse
temperature
termostat
thermostat
Hi guys just looking to get into installing pv and after some recommendations for an irradiance meter and a thermometer, I already have a dc clampmeter
Cheers Gram
Job were doing at the moment, had a quick look at the underfloor before we left today.
Its a Uponor system, with 5 different zones (11 Loops). It appears to have this "Uponor UP36 Water Temperature Controller" and nither us or the plumbers seem to know exactly what its for (Uponor designed the...
Hello all I was looking for some help and advice for a project I am building, I have no experience in electrics so I really need some help. I want to make an automatically controlled environment with heat and humidity. I have bought a controller that I intend to control a humidifier, light and...
Hi All,
Q: If an earth fault loop impedance instrument records a valve of 0.55Ω at 20°c, what is the corrected valve ( Using the rule of thumb method ) to allow for conductor maximum operating temperature?
Any replies will be appreciated.
johnboy1
Thread
earth
earth fault loop impedance
fault
figure
impedance
loop
loop impedance
question
temperature
value
Hi there
Am studying 2330 level 3 and have come accross a formula I cant get my head round in my workbook. It shows the formula to calculate the difference in resistance with temperature change.
R1/R2 = (1 + alpha t1)/(1 + alpha t2)
The worked example shows a field winding of a dc motor with...
Please could anybody recommend a accurate digital thermostat that would display the present temperature of the room and also obviously what I have set the boiler to fire up.
My present old honeywell thermostat doesn't seem to be very accurate and could do with changing.
Thanks
Spiceman
Thread
digital
display
honeywell
temperature
termostat
thermostat
thermostats
Does anyone know if cold weather can affect RCD's, I have just been testing the 63A 30mA RCD in the garage, this previously tested absolutely fine when doing the test at 30mA, but now it fails to trip in under 400ms, however when doing the 5x test it is fine :confused:, the test button works...
down2earth
Thread
doing
properly
rcd
rcd's
temperature
tested
weather
worked
Hi guys
I have a design question.. The task is as follows...
There is a room in my company which holds all the servers powered by a main UPS rated at 220-240VAC and 16 amps...
I want a device(s) that will sound a buzzer when room temperature reaches 30 degrees and will cut off the power to...
blacklight186
Thread
degrees
heating
overheating
power
relay
supply
temperature
thermostat
trip
Hi all
just been going through max zs etc and all the temperature changes
if i have got this right when you measure for R1 and R2 you take the temperature at the time. Apply a rating factor to get it ot 20 degrees and then when calculating zs or what ever to get to 70 degrees multiply it...
Hi,
Great to find a forum like this, hope I can get some help. Just moved house and find this place has a decent Valliant boiler controlled by a Sunvic Programmable Thermostat http://www.sunvic.co.uk/tlx6501.htm.
Have spent the last couple of days figuring the thing out and have got my...
ash1
Thread
boiler
house
question
switch
temperature
termostat
thermostat
won't
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc