Any 1 have any ideas ??

[RCD-joe]

Hi guys, Im hoping someone can point me in the right direction I require certain screwdrivers (2 prong and 3 prong ) I think they might be the crabtree brand .its been so long since I last used 1 I cant remember. doing repairs on some close lighting and all the bulkhead fitings have these screws holding the cover in place, I was hoping someone could advise me where to get these screwdrivers from . already tried CEF and BEMCO but had no luck

 

[Rockingit]

Not exactly sure what you're describing tbh, but shagfix do a cheap set of all the common security bits for just a few quid.

 

[snowhead]

WS.7112 M5 2 Prong Screw Driver · Coughtrie Lighting



[url]http://www.coughtrie.com/lighting-products/buy-online/ws7115-m5-3-prong-screw-driver-356/

[/URL]

 

[not clever]

Google security screwdriver sets

 

[specs]

can you post a pic of these fixings

 

[markc123]

No idea....

Isolate CU - Walk to Van - Take out Lump Hammer - Bop Bulkead on the face - "Hello Mr.Smith im awfully sorry, you seem to need a new fitting"

 

[specs]

WS.7112 M5 2 Prong Screw Driver · Coughtrie Lighting



WS.7115 M5 3 Prong Screw Driver · Coughtrie Lighting

never seen these before, 40 years ago had a set of two ,2 prong s/drivers for use on electric irons, I've still got them. we live and learn.

 

[dean.diy]

Outdoor 2 prong usually rusted but if sheltered/ indoor commomway then long nose pliers held in the two dimples( ? ) and twisted can get things started.

 

[Darkwood]

You mean a fork?.... they usually 3 and 4 prong

 

[dean.diy]

hmm reminds me, lunch time.

 

[Deleted member 72666]

Make your own from an old slotted screwdriver.

 

[itselectric]

Try R.S. Components.

 

[thekingiam]

i would go with the hammer idea.

 

[RCD-joe]

WS.7112 M5 2 Prong Screw Driver · Coughtrie Lighting



WS.7115 M5 3 Prong Screw Driver · Coughtrie Lighting

Nice 1 mate don't know where I got Crabtree from lol cough tree sounds right thanks again

 

[Dean Williams]

http://www.pudseydiamond.co.uk/images/stories/Diamond_Engineering_-_Keys_-_Wall_Chart.pdf

this is where i got my lamp post triangle key and 4-prong key from, i ordered them through Newey & Eyre

 

[paul_h]

Nice 1 mate don't know where I got Crabtree from lol cough tree sounds right thanks again

We use these in work, we get them from bemco. Usually we can force the three pronged driver to fit the two pronged screw just holding at a slight angle, takes abit of practice . Quite hard to get a hold of the two pronged drivers.

 

[telectrix]

terminal driver and hammer or a pair of small cutters.

 

[Grey Master]

You mean a fork?.... they usually 3 and 4 prong

Three prongs is a Trident, don't you people watch The Big Bang Theory??

 

[barneybhoy]

I think it's coughtrie screwdrivers you're looking for
http://www.coughtrie.com/shop/

 

[Golden_Boy]

Try R.S. Components.

My trusty RS Components set....



Had it for about 10 years... Never failed me yet..