Hey guys. After spending the most part of the afternoon in a loft with absolutely loads of insulation. New upon old and being driven insane with itchy and dust was wondering what's your tips for dealing with this

Also bought a respirator on my way home. Had to deal with a crappy paper mask that only blew dust into my eyes :lol:

(I bet tel says to get someone else to do it :lol: )
 
mornin' pete. late reply as have been out the house for 2 hours. as regards the itchy-poo , get apprentice up there to move it all out the bloody way, stuff it into the eaves.
 
Last edited:
Parcel tape works well pulling the fibers out your skin, not strong enough to wax you.
 
Parcel tape works well pulling the fibers out your skin, not strong enough to wax you.

If you don't mind being called a what's the word for it? oh I know a weirdo Vaseline on exposed parts sometimes helps, stops the fibers getting into your skin.
 
If you don't mind being called a what's the word for it? oh I know a weirdo Vaseline on exposed parts sometimes helps, stops the fibers getting into your skin.

I can count the times I've worked in an attic on one hand Pete, must not have built a tolerance up.
 
Cold running water is the best thing to ease it afterwards, don't rub or scratch the itchy areas, just run cold water over them.

A decent respirator, a set of disposable overalls and gloves are a good idea.
 
I can count the times I've worked in an attic on one hand Pete, must not have built a tolerance up.

Different for me, I only have to look at it and I start itching, horrible stuff.
 
If you are wearing full length clothing, not shorts or T shirts, then taping the cuffs down can help reduce fibre ingress.
The advice used to be just wear swimming trunks so the fibers do not get worked into the skin. More difficult to apply at work though.
Stripping down to your speedos and smearing Vaseline on yourself may not go down too well with most customers!

Try and avoid pressing your skin on the glass fibre, I often find my elbows are itchy when you have been lying down and wiring up a junction box on glass fibre.

I find that wiping gently with a clean microfibre cloth can lift off most of the fibres afterwards, certainly reduces the itching.
 
White paper suit with elasticated cuffs and leg ends, if too hot strip down to shreddies and wear over the top, they are about £1-2 each, worth every penny.
 
Last edited:

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Green 2 Go Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses Heating 2 Go
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Thread starter

Joined
Location
UK

Thread Information

Title
Dealing with fibre glass insulation?
Prefix
N/A
Forum
Electrical Course Trainees Only
Start date
Last reply date
Replies
11

Thread Tags

Advert

Thread statistics

Created
D00DY_T00DY,
Last reply from
rolyberkin,
Replies
11
Views
142

Advert

Back
Top