Electrical loading

[Adebambo Adeoye]

I m designing the electrical loading for an extension with an existing 4 bed hse. The loading of the existing hse is 1 x electric cooker. 3 sockets in every room and no electric shower. The protective device ( supplier) is 60Amps. The proposed extension is a 1 bed hse with an open plan kitchen. The loadings are 1 x electric cooker, 1 power shower, 3 x 1kw heaters total of 13 x 50w spot lights and 2 security lights.I propose to take the feed from the the existing property. Applying diversity,would 100Amps be enough to serve both properties. Just need a second opinion. many thanks

 

[telectrix]

i should think 100A is plenty for what you suggest. first make sure your DNO will upgrade to 100A.

 

[i=p/u]

what kind of fee would be involved in your expierience telectrx... my brother on about barn conversion on a farm which would require a supply.... i said 5k for a supply but i justmade that up

 

[Adebambo Adeoye]

Many thanks.

 

[GLENNSPARK]

so how big`s the cooker and shower then? cooker 2.3 kW?...what about the shower.....electricaly heated or just pumped?

 

[Adebambo Adeoye]

Thanks. The cooker in the extension is about 10Kw - not bought yet.The shower is a power shower.

 

[Rockingit]

Be grateful you haven't got an 80A supply and 66A of continuous duty ground source heat pump!!!!!

 

[i=p/u]

hes luck im not living next door , tapped into his supply with wireless

 

[Adebambo Adeoye]

is this a reply to my thread ?