Discuss fiber or fibre?? termination in the Computer and Networking Forum area at ElectriciansForums.net

James

-
Mentor
Esteemed
Arms
Supporter
Patron
Reaction score
8,937
I need someone to terminate an 8 core OM1 cable both ends with LC connectors.
anyone near coventry want to offer there services?
 
I know what an LC connector is - a newer version of the optical audio out connector in the back of my telly.
AFAIK though, it's not like crimping on a Rj45. The last time I saw someone joining fibre, it involved a stereo microscope type tool with vernier adjusters to line it up perfectly.
 
I know what an LC connector is - a newer version of the optical audio out connector in the back of my telly.
AFAIK though, it's not like crimping on a Rj45. The last time I saw someone joining fibre, it involved a stereo microscope type tool with vernier adjusters to line it up perfectly.
Yep still none the wiser ?
 
All joking aside about wagos but they are starting to use a similar connector for fibre that is stab in!

@James hi I asked my mate and he can't do it unfortunately but he has said he may have a contact if you still need one, he is going to get in touch with him over the weekend.
Sy
 
All joking aside about wagos but they are starting to use a similar connector for fibre that is stab in!

@James hi I asked my mate and he can't do it unfortunately but he has said he may have a contact if you still need one, he is going to get in touch with him over the weekend.
Sy
Any contact is useful for me. Thanks for your help
 

Reply to fiber or fibre?? termination in the Computer and Networking Forum area at ElectriciansForums.net

Similar Threads

Hello, I am burying a fiber optic cable so I have internet in my garage. I have purchased the following flexible conduit to run the fiber optic...
Replies
2
Views
831
We have had RG11 installed in some flats for use with Virgin/Internet. It should I think have been RG6 but the guy at Virgin was insistent it...
Replies
4
Views
377
Hi, while carrying out an EICR at a farm cottage on Friday i came up against a problem early on. Whilst measuring the Ze the reading i obtained...
Replies
22
Views
2K
Hi there, I was wondering if anyone could advise me on the WT Henley Series 8 house service cutout. I have one of these installed at my house and...
Replies
3
Views
520
Hi guys - wanting some nylon terminals for a toggle switch but the connectors are curved above the screw - can anyone tell me the the type of...
Replies
2
Views
649

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock