Fitting bolt in fitting

[Improver]

Hi all I have an outdoor wall light which is bolted from behind. Then a decorative nut threaded on the front.


As I push the plate on the bolt goes through leaving nothing for the bolt to grab on to one side as the wall is hollow on the back.

Such an easy job turned annoying lol. Anyone have any tips before I throw the light

 

[westward10]

So you can't get the nut on?
Try holding the edge of the thread with a knife so it doesn't fall back.

 

[UNG]

Some duct tape on the back of the plate to stop the bolt moving back or just epoxy resin the bolt in place

 

[Improver]

So you can't get the nut on?
Try holding the edge of the thread with a knife so it doesn't fall back.I’ll try these, wall behind has a hollow. So fall back cheers

 

[littlespark]

The trademark features of a light fitting designed by a non-tradesman.

Sticky tape, blue tack, putty.... anything just to hold it in place

 

[Improver]

The trademark features of a light fitting designed by a non-tradesman.

Sticky tape, blue tack, putty.... anything just to hold it in place

Cheers I can’t believe the fiddle with this fitting. Wiring takes five mins and then I’ve been messing about with this poxy bolt which keeps disappearing as I got to bolt up . Blu tac may actually work well.


Thanks all

 

[timhoward]

Cheers I can’t believe the fiddle with this fitting. Wiring takes five mins and then I’ve been messing about with this poxy bolt which keeps disappearing as I got to bolt up . Blu tac may actually work well.


Thanks all

Don’t worry we all hate those fittings!

 

[nicebutdim]

Don’t worry we all hate those fittings!

Just about bearable on a perfectly flat wall, but uneven surface or mortar line they're a royal pain in the backside. Yet another example of why designers should be made to fit stuff they design, before it goes into production.

 

[DefyG]

A temporary wedge like a flat blade screwdriver normally does the trick!

 

[brianmoooore]

A temporary wedge like a flat blade screwdriver normally does the trick!

Agreed, but we shouldn't have to. See second sentence of nicebutdim's post above.