hmmmmmmmmmm

[Deleted member 9648]

Re- the coffee machine,test the resistance of the elements,apply ohms law and you'll be able to work out the load.

 

[i=p/u]

so if its a 5pin camando socket, just each phase too neutral .. i couldnt see on it where any info is plated .. and its a pretty big machine which is aleays operational when i get there

where this post comes from , he says has same machine across the street in another cafe

 

[sedgy34]

It's not a coffee machine it's a :001_9898: Machine

 

[SKY]

If you do clamp it up check the Amp draw from cold start up (worst case) - elements normally pull more Amps while warming the water then drop off when top up heating - just my 2 pence worth.