Long story short, I forgot to mark where my cables were prior to installing laminate. I accidently skimmed the side of a cable for one of the electric heating pads under the laminate when drilling a hole in the laminate for closet doors. Right now, I'd rather have the heating pad working than the door up.
These are 240V pads. Dedicated circuit for about 7 pads. I have split the cable. One side of the cable I can pull slack. The other side is taut. The current hole in laminate is about two inches square. I'm not a qualified electrician. Would an electrician even be able to fix this? Ideally I'd like to splice and hide under the floor again using wood filler to plug hole.
These are 240V pads. Dedicated circuit for about 7 pads. I have split the cable. One side of the cable I can pull slack. The other side is taut. The current hole in laminate is about two inches square. I'm not a qualified electrician. Would an electrician even be able to fix this? Ideally I'd like to splice and hide under the floor again using wood filler to plug hole.
- TL;DR
- Hit a heating pad cable under laminate, need options
