SuperlecDirect - ElectriciansForums.net Electrical Suppliers
This official sponsor may provide discounts for members

Discuss Issues with expanding foam in heat in the Electrical Forum area at ElectriciansForums.net

Gavin John Hyde

-
Arms
Esteemed
Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Not a great fan but have had to use it recently to fill gaps before trimming.
It seems as if the heat is stopping it setting properly.
2 different brands both sort of collapsed and ran out the gap leaving sticky residue.
Rather than holding its shape the foam turns gloopy and runs.
Anybody else had problems like this?
Only thing i can think is heat/humidity.
Used it in a hot building, like a greenhouse, was 27c inside.
 
Electrical2Go - Online Electrical Supplier
This official sponsor may provide discounts for members

telectrix

-
Mentor
Arms
Esteemed
You must be logged in to see the message.
 

telectrix

-
Mentor
Arms
Esteemed
You must be logged in to see the message.
 

telectrix

-
Mentor
Arms
Esteemed
You must be logged in to see the message.
 

UNG

-
Mentor
Arms
You must be logged in to see the message.
 

Reply to Issues with expanding foam in heat in the Electrical Forum area at ElectriciansForums.net

CK Tools :) The professionals choice when it comes to Electrical Tools
This official sponsor may provide discounts for members
Top Bottom