Discuss Materials in the Australia area at ElectriciansForums.net

J

johnnyb

Anybody else had this! you know those double appliance boxes, the ones that take a single socket and say a spur, well our customer bought all there own chrome sockets, switches, spurs etc them selfs, of a list we gave them, they must have thought it would be cheaper than us buying em, but alas there you go, the problem arises when the single socket and a spur are together they don,t fit, we had to take the edge off the chrome so they would fit, just wondering if any one else had ahd this trouble, the chrome stuff was bought from b&q.
 
slightly different problem i fitted some magnetic front plate stuff in my house the problem with those, its not possible to square them up when they are screwed back because they are very bulky on the back and fit snug in the back box even the adjustable lug didnt help
 
Dual accessory boxes WILL NOT accept anything other than standard white accessories.

Even non thin plate chrome do not fit.

Found this out at my expense a few years ago.
 
double appliance boxes, ?
when i use chrome sockets and like , you use normal metal back boxs -or single
just like you are putting 2 x gang doubles for TV you leave 2ins gap between metal boxs , then your boxs will fit chrome sockets
 
Cheers lads, we didn,t realise this would happen, and we had already sunk the boxes and plastered and it had been decorated when we found this out, like Jason to our cost, but wouldn,t you lads think that if b&q are selling this stuff they should be made aware of the problem, after all the double appliance box is made for 2x single items, and i take the point that you use single boxes 2" apart but this box is made to overcome that problem of lining them up.
 

Reply to Materials in the Australia area at ElectriciansForums.net

Similar Threads

  • Article
Electrical2Go - A Guide to Click Sockets: Which Is Right For You? Click Sockets Guide: Which is right for you? Click is a leading manufacturer...
Replies
0
Views
491
Hi all. Have an issue i'd love some advice on if anyone would be so kind. Will try to be brief. Thank you!! So, have an intermittent RCD trip at...
Replies
43
Views
3K
Hi all, Disclaimer: I'm not an electrician and have very basic knowledge of electrical installation. We've been putting in a new kitchen into an...
Replies
17
Views
2K
  • Locked
  • Sticky
Beware a little long. I served an electrical apprenticeship a long time ago, then went back to full time education immediately moving away from...
Replies
55
Views
5K
I've have had a lot of experience of "DIY house electrics" (changing sockets, adding sockets, lighting circuits etc.) over many years but what...
Replies
7
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock