P
per42c42
Hi, I'm looking to split a large building into a group of flats.
However I have only worked on wiring up houses before so never had to install multiple consumer units in one building.
Should I use a distribution board or do I use another method to hook up the coin meters which will then feed into each flats consumer unit?
Any help would be appreciated ;0)
However I have only worked on wiring up houses before so never had to install multiple consumer units in one building.
Should I use a distribution board or do I use another method to hook up the coin meters which will then feed into each flats consumer unit?
Any help would be appreciated ;0)