Sub Board?? How shall I go about it?

[buzzlightyear]

No 2.5mm

just checking.

 

[buzzlightyear]

No 2.5mm

just checking.

 

[SJD]

I've done a 5-bed with 3-phase and approx. 40 circuits.

Admittedly somewhat high-spec. E.g. kitchen had circuits for 3 ovens & hob, as well as sockets & lights. And 2 backup immersion tanks in case of boiler failure. Plus various outside lighting & gate circuits.

Again, sockets in 2.5mm, multiple circuits per floor to keep the cable lengths down.

In this case, everything in a basement plant room, rather than boards scattered about the building. Doesn't make much difference to cable lengths.

 

[Pete999]

I though we had a similar thread the other day talking about Radials or RFC in a large 10 bedroom house with separate DBs on each floor...

We did, same poster

 

[Octopus]

We did, same poster

Yup, hit, nail and head spring to mind

If the OP has "won" the business, lord knows how he's costed it .... and if its not a HMO, then its going to be really high spec ............. the following threads by the OP could make interesting reading....

 

[Toneyz]

It's a house. 10 Bedroom house. I'd say there's around 10 circuits on each CU

Is this the same house as the post the other day?

 

[Pete999]

Is this the same house as the post the other day?

Yep and same poster

 

[elsparko]

.

 

[westward10]

Am I the only one getting fed up with this random picture posting!!

 

[westward10]

Are you agreeing that I am the only one