Hi all,
Done a few small bits on zelio PLC, fairly familiar with them but stuck now...
My next project is to fill different quantities of water depending on a select switch.
I've a water flow metre and connected up to the high speed counter..
Any ideas how to for example set it up so when i select my preset value that i measure the flow and then stop the valve when i reach the quantity. So i want to put in a equation to measure the flow over time running and then stop when i reach value.
Eg... I want to fill 10 Litres of water to a process and it needs to be fresh flow so cant use a buffer and the pressure changes slightly so cant just use a timer.. (Still doesn't work when i fit pressure pressure regulator and timer - Its close but not accurate enough).
Due to the process i want to just use in an inline flow meter
Any help appreciated
Done a few small bits on zelio PLC, fairly familiar with them but stuck now...
My next project is to fill different quantities of water depending on a select switch.
I've a water flow metre and connected up to the high speed counter..
Any ideas how to for example set it up so when i select my preset value that i measure the flow and then stop the valve when i reach the quantity. So i want to put in a equation to measure the flow over time running and then stop when i reach value.
Eg... I want to fill 10 Litres of water to a process and it needs to be fresh flow so cant use a buffer and the pressure changes slightly so cant just use a timer.. (Still doesn't work when i fit pressure pressure regulator and timer - Its close but not accurate enough).
Due to the process i want to just use in an inline flow meter
Any help appreciated
