I have no experience in the installation or fault finding of, central heating systems.
I don't do, and have rarely done, domestic work.
I volunteered recently to look at an elderly lady's situation whereby the system had been installed, then altered as the room stat was relocated from the...
VoltzElectrical
Thread
centralcentralheating
cylinder
heating
help!
programmer
systems
thermostat
valve
video
Hi all im an industrial maintenance spark, have a problem with my central heating at home I have heat on all small radiators up and down, the large two in the kitchen and living room double skin double convectors I have no heat what so ever i have bled both no air in system, heat on incoming...
joel89
Thread
centralcentralheatingheating
house
issue
radiators
system
water
Hey guys
I've basically rewired a bungalow and while doing so it only has a hot cylinder tank and a cold water tank in attick (I presume) I'm no expert basically a noob to boilers. I just replaced the live feed. The but it only has the above no boiler to heat with gas. There is 2 power...
Davey1988
Thread
boiler
centralcentralheatingheating
question
switch
water
Hi, My control unit is operating. The time is displaying and you can use the various functions but the problem is there is no red light illuminating and will not come on. Even the 1hr+ option isn't kicking in. The heating has been used since approx. early april. Hot water fine and so is boiler...
dez0178
Thread
centralcentralheating
control
danfoss
heating
normally
option
problem
tried
unit
Hiya all you good looking sparks,
I have a Siemens rwb29si central heating timer and it is stating "service due" and has stopped my heating from working, how the f#€¥ do I reset it?
thanks
- - - Updated - - -
I have googled it but with no luck
ICE
Thread
again
centralcentralheatingheating
number
programmer
siemens
timer
working
Hi I wonder if someone can help me I'm having trouble getting my heating and hot water to come on at the same time I've recently replaced the pump and the 3 port valve
The old 3 port valve was a Honeywell mid position v4073a
And the new one is siemens 3pmp-v22 but i cant seem to get it to...
aaron1591
Thread
centralcentralheating
earth
heating
neutral
position
valve
wiring
Hi there, I'm currently in my 4th year, been given a job which includes wiring up the heating. Don't have any real experience in this area soo help would be much appreciated.
2 combi boilers feeding
2 seperate heating zones with rads, a underfloor heating zone and a hot water circuit which is a...
cairns
Thread
brown
centralcentralheating
cylinder
heating
newbie
plan
s plan
valve
water
wiring
I’m hoping someone with more experience of central heating systems can help with this problem, as I’m sure it must be a common situation.
A plumber has replaced a system boiler, which heats the central heating and also a hot water cylinder. The system comprises a programmer, pump, valve...
Hi All,
I would really appreciate if someone could help me ascertain what the continuous electrical buzz/hum noise is under my floorboards?
I stay in a flat directly above a shop. They had been leaving their Emergency Light on through the night and I thought this may have been contributing to...
Transformer
Thread
centralcentralheatingheating
light
noise
their
transformer
Wired in a y plan heating system not so long back , all was well until the boiler packed in a few months back , the new boiler has terminals for the external stat inside the control panel , my stat cable goes back to the wiring centre , the stat no longer works? Help please?
Welshsparky
Thread
boiler
centralcentralheatingheating
sometimes
system
terminals
I was at a job today where there was a central heating comprising of 3port valve, what i couldn't understand was why is there HW off connection to be used in the programmer and also a third connection to be used on the tank stat, also this system also wanted a 2port valve incorporated into the...
I've found myself in a whole new world.
Anybody give me an update on Heatrea Sadia Central heating. (Heatrae Sadia). I've just had a call out to a flat that "had a problem" with the electric shower. However the MCB that blows is the 60A one in the switch room to the block of flats not the 80A on...
The inlaws have had british gas round to install one of their wireless thermostat and a UP2 duel channel programmer for controlling the hot water and heating, and here in lays a potential problem.
Their fuse board is an old wylex job with 3036 semi enclosed ceramic rewirable fuses and lately...
I require a central heating time clock that will fit onto a 2 gang metal box
Or is there a conversion kit that will allow me to fit standard one gang fitting onto 2 gang?
Thanks in advance
brizospark
Thread
2 gang
box
centralcentralheating
clock
fitting
heating
something
I have an old E type boiler that has a gravity fed water system , heated by the boiler then stored in a tank. The central heating just has a pump. I have removed the old room stat and programmer and installed a new 2 channel programmer and room stat.
I thought it was all wired correctly as it...
i have no central heating experince whatsoever! ( although ive been sparkying for 10 years ) Ive currently got a immersion tank with a 5 core flex trailing from it and a boiler downstairs with no supply.. What do i do?!
help!!
I am working with a made plumber, he has installed a S PLAN SYSTEM, but with a diverter valve ( witch is a two port eebszone valve ) near the cylinder. so in total there are 3 zone valves apparently this gets wired to the cylinder stat???
cant find any wiring diagrams to follow, they all...
feebs73
Thread
centralcentralheating
cylinder
heating
plan
s plan
safety
valve
valves
water
zone
Certain this topic has been covered loads of times - sorry
i have had very little experience of central heating wiring in the past, basically it was one person who did the vast majority of it, but now he has left the company and now it has fallen into my lap.
i can wire up systems but usually...
I have been asked to install a new C/H Thermostat for a customer - never done one before so will be a learning curve.
How easy are they to install (never seeing the wiring diagram before - of course seen one in operation)
What makes are good to use, I dont know the make/model of the existing...
problem with central heating timer ie
does not allow hot water and heating on at the same time they just cancel each other out
any ideas much appreciated
foghorn
Thread
boiler
centralcentralheating
combi
heating
timer
water
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc