shed

  1. J

    TT stake in outbuilding

    Evening. Came across a shed with armoured 2 core 2.5mm running to it on a TNCS system (RCd protected), with the sheath of the armoured being used as the earth (Shed is only 5m from house); I know this can be acceptable, but I’m adding sockets in the garden and was considering putting in an earth...
  2. V

    Feeding Power To Shed

    Everyone, I wanted to get some clarification on how to apply the following requirements from the NEC to the wiring of my shed. The shed is completely detached from my main home and has a burial cable running to it. 1: If a structure is completely detached from the main building and a panel is...
  3. R

    What size and what type of wire to use from house to shed my house is 165 feet away

    My shed already has a breaker box and is wired already. My house is 165 feet away my breaker box has a spare 20 amp. What size wire do I need to purchase I want to bury the wire aswell I will be using lights in the shed aswell as plug in to power tool all of which are 110 tools no 220 I will run...
  4. D

    Power to Shed

    HI Can anyone please advise me on the correct rcd and cable for power to my shed I would like to run a power lead from the consumer unit to my shed , my unit has RCBOs, should I use a 16am RCD A / B or RCBO from the main board? This will then go to my shed into a 2 switch consumer (shed unit)...
  5. C

    Cable Size for 100m Shed Run

    Can anyone recommend a good Cable Size calculator to use online? The old man wants me to order some 6mm 3 SWA to feed his shed that will go on to supply some sockets, fairy lights around the garden and other stuff, no power tools or high load activities. Cost is the mitigating factor here...
  6. S

    Electrical wiring in shed & heat damage

    Hi, I'm installing a new shed in Brisbane made with colorbond. Obviously it will get quite warm inside so will be insulating with appropriate materials - probably foilboard. The question I have is with regards to running electrical cabling inside plastic conduit next to the colorbond and/or...
  7. H

    PV Panels on a shed

    Hi All, Just looking for a bit of advice, I havent had much dealings with PV panels my self, But a charity I support locally who provide Horticultural therapy for Forces veterans are having a new shed built, and have asked me weather having PV Panels fitted would be worth their while. The...
  8. B

    how to wire 4 way consumer unit (shed)

    hi I have a 4 way consumer unit I need to add to my shed. first there is no busbar , so i have got one from screwfix. but I am not totally sure where to put the live feed in please? where do i put the busbar top or bott where do i put the neutral in / feed I am OK with most electric please...
  9. M

    Earthing A Supply To A Wooden Shed

    I am considering the options which may apply to the earthing arrangement for a supply to a wooden shed. The property has a TN-C-S supply from which a 60A isolator feeds a 3-core 16mm2 swa sub main 13 metres to a detached garage. The property has a supplementary earth rod and the garage also has...
  10. R

    Agricultural shed

    Hi All, To be aware I'm a trainee and not qualified yet but my question is in the regs agri buldings are a special location so need more thought. What cable needs to be used for plugs and lighting? Could you get away with using hituff cable or would it need to be SWA or singles in conduit? I...
  11. S

    UK Power to shed

    There is a fuse spur switch from the ring main, this spur feeds a two double sockets as a radial to the shed, is on 2.5mm flex in conduit underground. (Installed by Council Electrician) What I want to know is; can I use the fused spur to power a CU and run a lighting circuit as well as a ring...
  12. F

    Running branch to shed

    I want to do a run to a subpanel in a shed - about 50'. 3 circuits: lights, electrical, spilt. I have an isolation panel - can this be retrofitted with a subpanel circuit to branch off to the shed?
  13. R

    Sub panel to shed?

    Hi. Wondering how bad (or OK?...doubtful) of an idea it is to run some 14-2 from an existing outlet, underground in PVC to a new sub panel in a shed. The run would be about 20 feet total. I just need one circuit in the shed. Will be running 3 outlets and 2 LED strip shop lights.
  14. B

    DIY Extension lead in hose pipe for external power to shed

    Hi all, looking for advice, based in the UK. I have a 30m long garden with shed at bottom that I want to run an extension lead to on a permanent basis. Use is for power tools (drill, jigsaw) plus lamp in the winter so neither constant nor heavy usage. Currently I run a single 40m reel...
  15. K

    UK Supply for garage and a big shed

    Just looking for abit of advice newly qualified spark (only ever done new builds this is my first private job) and I’m doing a job for a neighbour and there’s wanting supply to supply and garage and then the shed supplying aswell and was wondering if I I can get away with just running one supply...
  16. P

    Connect Sockets To Shed Supply

    Hello, The shed is supplied with 6mm Swa on a 25amp rcbo. Inside the shed is a 20amp socket circuit and a 5 amp lighting circuit. Can I add a junction box to the supply cable about mid way and radial off that box to a double socket? a 32amp radial requires 4mm, and a 20amp radial is 2.5mm...
  17. N

    New Circuits from a shed DB

    Hi guys, I'd appreciate the opportunity to pick your brains a bit, and make sure I'm on the right track, please. (Will also be talking to my course tutor) I'm currently studying for my NVQ lvl 3, and an opportunity has come up for me to do work which may be good for my portfolio. I'm a...
  18. D

    Supply to shed

    Hi,I want to install a twin socket to a shed.The shed is of wooden construction and approximately 6m from the garage.I can't go underground due to a tarmac drive,so will have to go overhead. If i install a catenary wire between shed/garage,can i then use twin and earth between the socket in the...
  19. S

    UK Electric supply to new shed.. The main property is TT earth system.

    I propose to use a redundant shower supply that terminates in the attic. This will be connected to swa 4mm 3 core cable and run 45m to a new shed with a separate consumer unit with rcd and 1 6a and 1 20a breaker. I'm not proposing to have any high consumption equipment in the shed. My questions...
  20. D

    Shed/garage supply

    Hi all , a family member has asked me to come and install a small board and downlights and sockets in his newly buit garage. There is currently a 6mm SWA cable running from the house to the shed which has a small garage board powering lights and sockets in the shed. I was going to change that to...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electric Underfloor Heating Electrician Courses Heating 2 Go Electrician Workwear Supplier
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Advert