- Reaction score
- 17,021
There’s quite a few of us in Scotland if you need an “eyes on” recommendation.
but I see nothing wrong with what’s been proposed so far.
but I see nothing wrong with what’s been proposed so far.
Discuss 10mm T&E to 6mm T&E in the UK Electrical Forum area at ElectriciansForums.net
With there being a 10mm T+E, maybe a 50amp Crabtree oblong 4500 DP switch in the attic.If it is all "indoors" as an attached garage then go with the physically easier option of the 10mm-6mm join and keep it on the RCD side with a 32A breaker.
Make sure you have a proper JB that will take 10mm though. Something like this:
60A Junction Box 3 Terminal White
A selected range of special purpose moulded and stainless steel accessorieswww.cef.co.uk
What KW is the shower??Hi
I have recently had a bathroom replaced which had an electric shower, this was changed out for a mixer shower off the combi boiler.
The shower cable is a 10mm twin and earth which was pulled back to loft space and JB'd.
A 40amp cb fed the shower.
I am wondering if it is ok run a 6mm supply to my garage, tying into the above JB with the 10mm cable?
There will be a garage consumer unit installed which has a 40amp 30ma rcd, 32amp and 6amp cbs fitted.
The 10mm cable appears to be a horrendous,tight run hense reason asking if ok to utilise jb for supply.
Thanks
IGNORE please didn't read the bit about the boilerWhat KW is the shower??
Reply to 10mm T&E to 6mm T&E in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.