B
bobbyboy
help can anyone advise me on if you can get a pull cord which can switch two sets of lights seperatly ie. one pull one set of lights second pull another set and third pull switches off many thanks
Search the forum,
Discuss 2 gang pull cord in the Australia area at ElectriciansForums.net
Reply to 2 gang pull cord in the Australia area at ElectriciansForums.net
Similar Threads
I’m replacing an old 100mm extractor fan in the kitchen with a new one. The old one was a pull cord fan whereas I bought a timer one (no pull...
Hi
I'm looking for some advice for adding a time delay on my parent's shower room fan.
My parents had a section of their garage converted into a...
Is the following set up possible with a 3 Gang 2 Way Smart Wifi Switch set up (the black glass type touch ones)
One of the 3 switches, switches...
Hi New to this forum, Just looking for some advise as a DIY person. I have recently purchased a new home. I have come across a wall light which...
Hi, in my bedroom i had a 2 gang dimmer that powered 2 set of 3 spot lights and also had passthrough wires to other sockets. Im changing to just...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
RCDs for fault protection in adibatic equasionCould you not add a fused spur to provide protection for the spur? An mcb will always trip...- Latest: newfutile
-
Is LCL 601/5928/5 equivalent to C&G 2391-52I asked my boss for an inspection and testing course and have recieved the go ahead, the only...
- Latest: grantj129
-
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.