a really nice neat

[ayjay]

dis board

 

[markc123]

ayjay are you still on the christmas spirits? whats with the random thread's lol!

 

[dingodeano]

Foreign?

 

[MDJ]

Exhausting

 

[ayjay]

its from a forum in thailand www.teakdoor.com the fella is having a house built up country
it maybye of zero interest but it makes interesting reading rather than all the arguments on here

 

[SKY]

What country is that install - never seen smoked MCBs before.

 

[ayjay]

blimy ,you lot were quick to post

 

[dingodeano]

Least he's using Schneider.

 

[Darkwood]

Grouping factor ??? hope those cores in the middle don't have heavy loads on them :28:

 

[ayjay]

as i said sky -thailand
they used to use japanese stuff
i think thats square d

 

[MDJ]

Can't see how anything works, the phase conductors are not connected

 

[ayjay]

don,t forget chaps, thailand has no electrical regs whatsoever

 

[ayjay]

his meter can only suppy 5 amps btw!

 

[dingodeano]

What's going on with those colours,?? Black tails to green neutrals? White is earth terminated behind main switch somewhere?

 

[Darkwood]

They seem to have combined system within the CU E/N block at the top? then seperated after switch??

circuits are White - N
Red - L
Green - CPC

Supply L and N black (CPC created by strapping Neutral to earth block at top)

 

[dingodeano]

I will have a look at TeakDoor: The Thailand Forum

 

[MDJ]

Don't do it, you may end up with a ladyboy :38:

 

[dingodeano]

They seem to have combined system within the CU E/N block at the top? then seperated after switch??

I thought neutral was looped to another board maybe? The main switch don't make any sense. I think it is a DP breaker looks like a C63

- - - Updated - - -

They seem to have combined system within the CU E/N block at the top? then seperated after switch??

I thought neutral was looped to another board maybe? The main switch don't make any sense. I think it is a DP breaker looks like a C63

 

[Adam W]

Those aren't RCBOs are they? Where's the RCD protection?
It doesn't comply with BS7671 and judging by the way half of it isn't connected it won't even work.

 

[Darkwood]

I thought neutral was looped to another board maybe? The main switch don't make any sense. I think it is a DP breaker looks like a C63

Its double pole it says N on back of box thus it must isolate a neutral bar where all white cables go, the L obviously is a plug on busbar rail.