Discuss AM2 help for Monday please in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

Reaction score
1
Got my AM2 Monday, just wondered if anyone could give me any advice if they have taken it before or things to be wary of.

Could someone please explain to me using fly earth leads, when to use and when to jot? Might seem simple but my college have basically put me for the AM2 with barely any help from them
 
Hi Anthony,

Welcome to the forums....

Firstly, go to this thread:-

Trainee - How to access trainee forum. - https://www.electriciansforums.co.uk/threads/how-to-access-trainee-forum.170306/

Read it, and sign up for access to the trainee only area, when you've done that and been granted access (if you do it like now, I may approve your application within the next 10 minutes :) ).

Then, read this thread:-

https://www.electriciansforums.co.uk/threads/am2-my-experience.170633/
 
Do you have to use fly leads connected to a banjo when using SWA and SY cable. Also when doing the PFC tests do you test each phase to earth and double the highest reading and record that as you ipf and just record the PSCC (phase to neutral??) on the back of the test sheet

If the sheath or screen is being used as protective conductor then yes, you need to banjo and fly lead to the earth terminals.

Be careful with your terminology. Measure PEFC (L-E) and PSSC (L-N), the highest of the two values becomes the PFC. Record this value if only Single Phase is present. Double it and then record value if Three Phase is present.
 
Another question, on my test results I have 2 circuits that are 3 phase do I put e.g motor circuit L1 then all the results for that phase then underneath motor circuit L2 then all the results etc or do I put motor circuit and take the highest reading off all of the results I get for each phases and use that?
 
Got my AM2 Monday, just wondered if anyone could give me any advice if they have taken it before or things to be wary of.

Could someone please explain to me using fly earth leads, when to use and when to jot? Might seem simple but my college have basically put me for the AM2 with barely any help from them

Hello Anthony,

Just interested in how you got on in the AM2 test?
 
If the sheath or screen is being used as protective conductor then yes, you need to banjo and fly lead to the earth terminals.

Be careful with your terminology. Measure PEFC (L-E) and PSSC (L-N), the highest of the two values becomes the PFC. Record this value if only Single Phase is present. Double it and then record value if Three Phase is present.
Phase to phase is the worst case on a 3 phase supply this should be measured then doubled and recorded
 
Considering it is now Wednesday he must be nursing a hangover. It annoys me when people come on the forum ask for advice and help and don't come back to let those who have helped others may be helped by the reply or we could be wrong and be corrected.
 

Reply to AM2 help for Monday please in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock