Axia vent shutter fan

[i=p/u]

Last we job today was to wire one of the fans above with speed controller.. Seemed all straight forward as the mechanical guys supplied and fitted it. When I went to connect to the fan the wiring box is inside the middle of the fan, I reckon the fan should of been flexed with 5c before fitted , has any if yous come across this, my only option now is to try get Down cavity and drill a hole to try and get to Middle where connections is.

- - - Updated - - -

It's about 300mmx300mm

 

[Hawk81]

Can you not remove the fan and work at it and refit it?

 

[snowhead]

The terminations need to be accessable for maintenance.
Either there is a way into them with the grill off or it's not been fitted correctl i.e boxed in.

 

[i=p/u]

Trying to keep cables concealed. Yes you can get at connections moving the grill..

 

[i=p/u]

As for taking out the put expanding foam round it... Well see come Monday.