Board size

[Dave Appleby]

Anyone know any low height boards?

I only have 19cm height available.
Only needs to be 10 way.

Bit stumped!

TIA
Dave

 

[SJD]

When you say only 19cm height available, is that a hard limit e.g. due to brickwork or is there a cupboard or meter board you could move or alter? How about a photo of the space?

 

[SparkyChick]

Dave, please don't make multiple posts for the same question... it tends to irritate people and makes any discussion harder to follow.

Having had a quick scamper around numerous suppliers, I think you are going to struggle.

As @SJD says, a little more information about the limitations and a picture may help immensely.

 

[timhoward]

The smallest I have ever found is 204mm high, made by Deopke

Data Sheet Dist. Equ. 03: DCM-SL split load dual RCDs - Doepke UK Ltd

www.doepke.co.uk

In the end I didn't use it, I fitted a box, DIN rail, and extended circuits to where there was more space..

(I have a distant memory that Proteus made a short one too but the internet is not supporting my memory here)

 

[Dave Appleby]

Dave, please don't make multiple posts for the same question... it tends to irritate people and makes any discussion harder to follow.

Having had a quick scamper around numerous suppliers, I think you are going to struggle.

As @SJD says, a little more information about the limitations and a picture may help immensely.

Sorry.

I wasn't signed in
I signed in and it presented a blank post so I rewrote

 

[Dave Appleby]

When you say only 19cm height available, is that a hard limit e.g. due to brickwork or is there a cupboard or meter board you could move or alter? How about a photo of the space?

I've just realised....
Bottom is the meter. Above is a cable trunk then the bottom of a shelf However....

I can build it out past the trunk which will probably buy me enough room.

Thanks for sparking the idea!