Hi I have recently taken my compex course and failed on Ex01.. they reported back I used the wrong crimps.. I am presuming the EX01 are all the same.. red crimps for lighting and switches and black crimps for the JB’s does this sound correct.. thanks Also when picking zones to place equipment in what dictates what can go in the zone or the gas group.. I.e if you had a zone 2 T6 but 2C gas is it always the worst case you go to.. thanks
UK Compex Ex01
Discuss Compex Ex01 in the UK Electrical Forum area at ElectriciansForums.net
Reply to Compex Ex01 in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
Hi all been trying to find help I’ve failed my compex exam twice now and have one go left
They don’t tell me what section failing on all I know...
Hi all, ive found myself in a bit of a desperate situation here.
I sat my compex 10 months ago and failed sections 01 and 04. I was meant to...
So a quick catch up so you can get an idea…
I was asked to do a job for another electrician, as he is too busy. I’m busy myself but said I’d...
Hi,
I'm about to switch to an energy tariff whereby i think it would be better/cheaper to heat my water via my immersion heater and not my gas...
I own a top floor tenement flat that I used to live in and then rented out after I married. It is currently empty whilst some work is being done...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Electrical Forum
Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical
forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.