- Reaction score
- 85
What does it stand for
- Thread starter sparks1234
- Start date
-
- Tags
- aus distribution dno network
Discuss Dno in the Australia area at ElectriciansForums.net
Share this page
G
Greg:
a listing of Electrical Abreviations that I'm currently working up may also be of help
M
mogga
DO NOT OPEN unless suitably qualified
Reply to Dno in the Australia area at ElectriciansForums.net
Share this page
Similar Threads
On an EICR I found a 200 amp 3ph supply, TNS earthing (which looks original) and Ze of 19 ohms. No rods. No RCDs.
L1 -> N was about 0.5 ohms...
So this is 1st floor maisonnette with concrete floor, 16mm2 single insulated tails coming from dual cut out on ground floor, through steel...
My company has recently done some air source heatpumps which require DNO notification and EV chargers which also require DNO notification. On an...
- Locked
Hi Guys
Is there a forum on here.... for Networking / data advice and help ?
Before I post my queries on here.
Thanks Sy
Good morning, can anyone offer any advice on DNO applications? We've recently had an enquiry regarding a 75kw PV installation and would be...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.