uHeat Banner - Forum Discount Available
This official sponsor may provide discounts for members
Advertisement - Content continues below
Advertisement - Content continues below

Discuss Examples of dubious manufacturers’ instructions in the Electrical Forum area at ElectriciansForums.net

Aico Carbon Monoxide Detectors
This official sponsor may provide discounts for members
Advertisement - Content continues below

Andy78

-
Mentor
Arms
Esteemed
Seen this in diy-shed light fitting instructions loads. They make it very clear that the connector blocks must be covered with TWO WRAPS of insulation tape. Because standards and that.
 

darkwood

Mod
Mentor
Arms
Esteemed
I posted a Chinese pump 3yrs ago-ish that had a complies with 18th BS7671 regulations sticker in 2016.
 

happysteve

-
Arms
Esteemed
instructions1.jpg
instructions2.jpg
Well looky here, looks like we got us a "ring" lighting circuit.

Son, pass me my insulation tape and my tape measure. I got this.
 

pirate

-
Arms
Esteemed
Bought a new telly...

No. 3 is interesting...

The middle section is the best advice, for sure.
 

telectrix

-
Mentor
Arms
Esteemed
looks like your pics have been keel hauled.
 

Charlie_

-
Arms
  • Thread Starter Thread Starter
  • #15
Somebody posted the other day that they were having trouble with some remedials; it all makes sense now
 
Bulk Workwear - Clothing Suppliers for the Whole Forum Network
This official sponsor may provide discounts for members
Advertisement - Content continues below

Reply to Examples of dubious manufacturers’ instructions in the Electrical Forum area at ElectriciansForums.net

Advertisement - Content continues below
Advertisement - Content continues below

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
Advertisement - Content continues below
Top Bottom