FLUKE 1663 Tester problem

[dazj90]

Thank you for the replies, think I'll either invest or make a checkbox for monthly checks.
Awaiting reply from FLUKE service department.

 

[dazj90]

It's due to be calibrated in July , but may be getting it done earlier as suggested ;-)

We haven't got a dedicated socket for verification yet but will probably look into sorting one out.

I'm based in a factory as a Maintenance Engineer, only recently started testing new installations so haven't got anything setup for verifying yet.
Would this be a standard socket that is only used for verifying the MFT?

 

[Andy-1960]

We use one of these.

FC2000 Check Box | Kewtech - http://www.kewtechcorp.com/products/calibration-certification/fc2000

 

[Midwest]

The idea of using the same socket, for Zs & RCD tests, is to provide some sort of reference for your monthly checks. It is not ideal, as in my experience the Zs values obtain is variable (many variables). You might need to use or install one specifically, that you don't have to unplug appliances before testing, or can cause disruption doing RCD tests.

The FC2000 looks a nice piece of kit, wonder how often that needs calibrating ?

Test Instrument Verification Tool (CheckBox) for Electricians - http://calcards.co.uk/

 

[Andy-1960]

The FC2000 looks a nice piece of kit, wonder how often that needs calibrating ?

We have it calibrated every 12 months but use it to verify all of our MFT's once a month and keep a record of the results.

 

[Midwest]

Gold standard I suppose, I've only got the one MFT, so I'll just use the Calcard & socket.

 

[dazj90]

I've only got the one MFT too, will be making a purchase of a check box too. CEF offering a small check box for £35.
Already got a socket in the office on its own circuit which isn't used.

Has anyone had any dealings with Fluke service department?

 

[Midwest]

I've only got the one MFT too, will be making a purchase of a check box too. CEF offering a small check box for £35.
QUOTE]

The Calcard is £25

 

[dazj90]

Would go for the CalCard but we haven't got any suppliers that can quote for one.

Tester is getting posted on Tuesday to Fluke. Tester has a 3 year warranty

 

[Midwest]

Would go for the CalCard but we haven't got any suppliers that can quote for one.

Google 'it'. If you don't mind lining the pockets of the Schemes, there's loads selling.