Have got any test gear

[buzzlightyear]

customer rings up have you got any test gear for a job , pops round and see this customer im trying to sort that out,
that needs sorting , customer says i have not got any monies .and what about the DNO seals you have broken
that was put in by a old timer wet pants .

 

[Pete999]

customer rings up have you got any test gear for a job , pops round and see this customer im trying to sort that out,
that needs sorting , customer says i have not got any monies .and what about the DNO seals you have broken

What is the job Buzz? your post is a bit confusing.

 

[buzzlightyear]

sorry pete , the old timer put the board in and hand started haveing problums
striped every room to find a fault on the new board he just put in , what a mess .i just walked away .

 

[Baddegg]

Don’t walk buzz.....run! ?

 

[telectrix]

looks like he's routed the rCD tails out and in the back of the box to make a tidy job. ..... worked well... NOT.

 

[buzzlightyear]

you should see the card for what he stripped out near the consumer unit ,he had every socket off the walls plus the cable he was trying to put back ,when I taken a pic of this
he said why did you take that ,me answer was just in case they find you dead .

 

[ipf]

you should see the card for what he stripped out near the consumer unit ,he had every socket off the walls plus the cable he was trying to put back ,when I taken a pic of this
he said why did you take that ,me answer was just in case they find you dead .

Should have told him you're a professional journalist who takes the odd photo to go with the article...I'd have believed you, no prob, buzz

 

[Mike Johnson]

looks like he's routed the rCD tails out and in the back of the box to make a tidy job. ..... worked well... NOT.

Well what else do you do when those neat tails you just bought are too long? I was looking for a Homma Simpson Doh smiley.

 

[freddo]

That's nice, good to see the unused MCBs left in place.