Discuss Help regarding 2365/5357 in the Electrician Courses : Electrical Quals area at ElectriciansForums.net
Why 8 CUs?Just some advice really guys, doing my 2365 hotel plan , just some advice on whether I'm on the right path or completely going southView attachment 63669
Spec would be my guessWhy 8 CUs?
It states itWhy 8 CUs?
Cheers mate , appreciated.you need to show on drawing for question C , switched socket outlets for a kettle, TV phone charger / laptop in each room (use OSG to put minimum number of socket outlets per room depending on size, you also need to show FCU for 700W heating/cooling and FCU for bathroom towell rail.
For question D show position of DB in each room and each of the above circuits coming from this db
label each circuit (for question e) i.e R1R for room 1 ring R1H for room 1 heating R1 TR for room 1 towel rail, the R2R for roomn2 and so on.
include a legend showing symbols used
Bad design then one large DB for the floor?Spec would be my guess
My guess is OP is going down a HMO route, each roohas it's own DB giving local resettable control over circuits, probably fed from 1 DB per floor, whith each floor DB going back to a central DB for the hotel.Bad design then one large DB for the floor?
'
Bad design then one large DB for the floor?
'
My guess is OP is going down a HMO route, each roohas it's own DB giving local resettable control over circuits, probably fed from 1 DB per floor, whith each floor DB going back to a central DB for the hotel.
D Show, on either electronic or hard copies of the drawing, how each circuit in the new hotelWhy 8 CUs?
Where and in what way?It states it
Cheers mate , appreciated.
What do you mean? where does it state that each room should have its own CU?i was answering the question someone asked about why all the Db,s
Probably on a spec sheet were not seeing, it may not. I've got a design project on the go for my 8202 (a mechanical workshop) and the info it's the best tbh.What do you mean? where does it state that each room should have its own CU?
the assignment spec says "What do you mean? where does it state that each room should have its own CU?
Oh right thanksthe assignme
the assignment spec says "
"d) Show, on either electronic or hard copies of the drawing, how each circuit in the new hotel
extension is to be arranged. The arrangement must take into account that a fault in any one
room must not effect another room." ONE way to achieve this is to have a seperate DB in each room. but it could also be achieved in other ways.
The spec also states
"
c) Show, on either electronic or hard copies of the drawing, positions of socket‐outlets and
fused connection units for the new hotel block giving consideration to the following items of
equipment in each room
kettle
TV
provision for phone charging and/or laptop use
supply to a 700 W air handling unit for heating/cooling (installed by specialist)
electric towel rail.
NO NEED TO SHOW LIGHTING IN HOTEL EXTENSION
Scan to PDF (use a mobile/tablet) and add on lines etc in MS Paint, or, if you have an A3 blueprint/drawing (or A4) then just use OHP sheets and markers.what app are you uisng to edit the file? I cant seem to find one that works and my college is useless.
Just some advice really guys, doing my 2365 hotel plan , just some advice on whether I'm on the right path or completely going southView attachment 63669
Reply to Help regarding 2365/5357 in the Electrician Courses : Electrical Quals area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.