L

Lixy56

There I was, just cooking toast when out of nowhere the toaster popped and sparked. Now all of the eletricity in the house has gone out sans the lighting and I need a fix ASAP because my poor gecko will be getting cold! I'm not tech savy in the slightest, the most I think I managed to do was a reset that did nothing. I'll attach a picture of the mains box(?)
THANKS!
 

Attachments

  • 20200217_153524.jpg
    20200217_153524.jpg
    41.7 KB · Views: 99
That's a fire alarm box not your main consumer unit.
 
  • Winner
  • Like
Reactions: Pete999 and Markyd
That's a fire alarm box not your main consumer unit.
Thats awkward ? but its beeping and three lights are lit tthat say
General fault
Battery fault and mains fault
Battery failure and charger fault

Does this help in anyway to know what the issue is? Where would I find the mains usually?
 
dont mess around...ring a local sparky
 
Do you know where your electricity meter is? Near it is normally a box with several switches on it.
 
There I was, just cooking toast when out of nowhere the toaster popped and sparked. Now all of the eletricity in the house has gone out sans the lighting and I need a fix ASAP because my poor gecko will be getting cold! I'm not tech savy in the slightest, the most I think I managed to do was a reset that did nothing. I'll attach a picture of the mains box(?)
THANKS!
Sounds like the RCD has Tripped locate the distribution board and re-set any switches that are down.... some types of RCD need to be re-set before they can be energised and this is one by pulling down the switch first then push it back up... before you do this unplug your toaster....... pictures are always alot of help?
 
  • Like
Reactions: Lixy56
ok so the main switch to the right pull it down till it locks into place and then push it up firmly and it should lock into place then re-set the MCB which is the other one that is down and you shoul be back up and running
 
  • Like
Reactions: Lixy56
Your socket breaker has tripped. Make sure the toaster is unplugged and turn the switch labelled 'sockets' back on. The RCD has also tripped but dabbers beat me to that!
 
  • Like
Reactions: Lixy56 and Dabbers
ok so the main switch to the right pull it down till it locks into place and then push it up firmly and it should lock into place then re-set the MCB which is the other one that is down and you shoul be back up and running
You'ream absolute life saver! (Literally) Thank you and everyone else who commented for the help :) I'm assuming the toaster is bust and I daren't do anything with it now haha
 
  • Like
Reactions: Dabbers and DPG
Yeah chuck the toaster. Not worth trying to save it. Have a sandwich.
 
Now that is sorted, are those RCBOs compatible with that board?
 
aren't eaton the new mem?
 
They are but I didn't think the new RCBOs fitted the memshield2 stuff? We still use the pods for those.
 
  • Agree
Reactions: James and 123
if you can fit it with a hammer, it's compatible. :) :) :)
 
Is the Gecko ok?
 
  • Like
  • Friendly
Reactions: DPG and freddo
I expect he's fine, just disappointed because he likes toast. :)
 

Similar threads

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electric Underfloor Heating Electrician Courses Heating 2 Go Electrician Workwear Supplier
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Thread starter

Email
Joined
Time zone
Last seen

Thread Information

Title
Help with mains ASAP
Prefix
UK 
Forum
UK Electrical Forum
Start date
Last reply date
Replies
19

Advert

Thread statistics

Created
Lixy56,
Last reply from
Timbo,
Replies
19
Views
2,525

Advert