Incoming tail retaining clips

[Skimpy Wan]

Does anyone know where you can buy clips for the incoming tails like the DNO use (figure of eight design)? If not, what do you use to hold them back (SWA glads)?


Sent ... using the force!!

 

[telectrix]

do you mean for outside the CU? can you not use cleats?

 

[davesparks]

Electrical wholesalers will sell clips of all shapes and sizes


Sent from my iPad using Tapatalk

 

[LankyWill]

they always use P-Clips

 

[Skimpy Wan]

I'm due to extend the tails as I need to dropped the CU by 1.5 metres (from above door to 1350 height for elderly couple). Normally I'd use cleats to hold the tails back, but I didn't know if we could buy similar cleats to the DNO as they have 1 fixing for both tails)?


Sent ... using the force!!

 

[rich.250]

White P clips with one fixing in the middle would be my shout.
Although I would probably trunk it if on show.


Sent from my iPhone using Tapatalk

 

[telectrix]

maybe something like:

SEG types - Dutchclamp

stackable clamps.

 

[Skimpy Wan]

Like the cleats in this picture?


Sent ... using the force!!

 

[Dave OCD]

I've often used 16mm T&E clips on the pair of tails together but more for neatness than 'strain relief' really.

 

[Skimpy Wan]

I'll be using SWA cleats if needs be, but didn't know if others had used / bought these so there is 1 fixing etc.


Sent ... using the force!!