-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
- Thread starter Liamsparky
- Start date
Discuss Klein cable cutters 160mm in the Electrical Tools and Products area at ElectriciansForums.net
Share this page
- Reaction score
- 8,197
You would think awg 0 would be the smallest diameter then moving upwards in number the diameter would get gradually wider, but no its the other way round ...
- Reaction score
- 1,709
Similar to the new GCSE grade system... Grade 1 is the lowest and Grade 9 is the highest !
I think it's so that as they make the exams easier... they can just keep adding numbers rather than adding a "*" to it.
- Reaction score
- 6,866
What happens when a cable is larger than AWG 0?
- Reaction score
- 25,511
Does 0+0=2
- Reaction score
- 8,197
I think its goes 00 , 000 etc etc
- Reaction score
- 67,269
only when you get your fingers trapped in the cutters.
Reply to Klein cable cutters 160mm in the Electrical Tools and Products area at ElectriciansForums.net
Share this page
Similar Threads
Hi all,
Got to look at a job where the builder has cut through the underfloor heating mat and it’s gone right through the heated cable.
Not...
Good evening all, I’m currently part way through my apprenticeship and we are working on IB, IN, IZ and IT and volt drop today. And it got me...
Hi,
The shower pull chord switch has snapped at my mom’s home and having unscrewed the switch I discovered a horror show(see pic). So I’ve had...
Hello All. I'm quite new to this game and gaining experience, but going well in the main.
My customer wants to feed a Hob ( on island in centre...
Hi Everyone,
Sorry for all the questions.
With he help of a friend, I recently installed some insulation into my mother's loft. Whilst adding...
Electricians Tools | Electrical Tools and Products
Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.
We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
La Rocca coffer machine helpA friend of mine got a 2nd hand coffee machine (OK, probably 3rd or 4th...) for use in a charity...
- Latest: pc1966
-
Fitting bolt in fittingHi all I have an outdoor wall light which is bolted from behind. Then a decorative nut threaded...
- Latest: Improver
-
32 amp 3 phase socket, 300ma RCDPersonally I would write a formal risk assessment , it has to be by or with the involvement of a...
- Latest: Julie.
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.