never liked the cfl ever since i had to use a torch to repair a connection on a fire alarm sounder with 3 cfl downlights all within 4 ft of the sounder.
( what i mean is i used the torch to see. used a screwdriver to do the repair )
 
the LEDs i have are the opal 2, narrower, but with an all white kitchen they are OK for the purpose. you may prefer the 60deg. ones for your application.
 
the LEDs i have are the opal 2, narrower, but with an all white kitchen they are OK for the purpose. you may prefer the 60deg. ones for your application.

Thanks for the insight on all this. I'd seen a few GU10s recently in one of the DIY stores, but they did not have 4 of any 1 type that I fancied using, and they were also unreasonably expensive. Probably have spent £25 on lamps alone for lamps in a new light in the last 6 month, so this really interests me.

Doing some net trawling tonight, LSimplyLED GU10s has a fair selection and none seem too expensive. The ones I like the look of (20 piece 5500 SMD) are somewhat unorthodox in their unlit appearance, but they claim to have a 120 degree angle, so should be spot on for downlighting as shown in the pic below.

GU10-High-Power-LED-20-piece-SMD-5050-320-Lumens-50-watts-equiv_350_240_1P17J.jpg


GU10-High-Power-LED-20-piece-SMD-5050-320-Lumens-50-watts-equiv_350_240_1O6UI.jpg
 
These are standard GU10 aurora downlights with 11w CFL's, they fit in just nice and give a very impressive light

If you can't get 11w CFL's in your fitting you can get 7w which are shorter and should fit in most standard GU10 fittings.

5e099a75-8385-ddb9.jpg


5e099a75-83a7-db5f.jpg

Yes like the part no:56569 from "screws fixs" only 58mm long like standard GU10's.
 
looking at that, i'd say sod it and bung a twin 5' fluorescent in
 

Similar threads

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electric Underfloor Heating Electrician Courses Heating 2 Go Electrician Workwear Supplier
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Thread starter

Amp David

Mentor
Arms
Supporter
~
Joined
Location
Glossop

Thread Information

Title
Low energy downlighting choice
Prefix
N/A
Forum
Electrical Tools and Products
Start date
Last reply date
Replies
27

Advert

Thread statistics

Created
Amp David,
Last reply from
telectrix,
Replies
27
Views
5,094

Advert