Mounting equipment

[bathroomboy]

Got a job coming up where I intend to split tails, henly block and shower unit, existing cu is mounted on breeze block wall in the garage, will I be ok mounting the henly block etc on the breezeblock or will I have to mount it on a board and if so what kind of board, does it have to be of special material. Thanks

 

[Guest123]

Hey.

Mounting it on the blockwork is fine, no board needed mate.

 

[Mac]

I'd mount in on a board.Why are you running the shower off a henley block

 

[Guest123]

Read his post mate....henly block to split the tails I'm guessing, and shower unit.

 

[acat]

Dont need anything what I would do is copy what has already been done with the other cu gives a much neater finish to the overall job

Chris

 

[bathroomboy]

What cable should I use from the henly block to the shower consumer unit ?

 

[Guest123]

You'd need to be using 16mm tails mate.

 

[Spudnik]

You'd need to be using 16mm tails mate.

Ummmm why?

10mm tails are good for 60 odd amps.

 

[Guest123]

Have you got 10mm tails in your van??

 

[Spudnik]

Have you got 10mm tails in your van??

Im not going to say on an open forum