Discuss PDU connected to SurgeX XF2 surge protector = safe ? in the UK Electrical Forum area at ElectriciansForums.net

A

anarchoi

I've been searching for the best surge protector (excluding whole-house solution) and came to the conclusion that SurgeX is the best choice.

My problem is that i need 16 outlets to connect everything in my home theather, and the price for the SurgeX devices with a lot of outlets is very expensive.

So i was wondering if it would be safe to buy a $300 SurgeX XF2 with 2 outlets, then take my "Tripp Lite PDUMV15" (16 outlets, not surge protected) and connect it to the SurgeX XF2 ?
So i would have a 16 outlets PDU connected to the SurgeX XF2.

Can the SurgeX XF2 handle 16 outlets of connected equippement ?
 
sorry we don't know much about the products you are on about, but I imagine connecting 16 outlets to a 2 outlet device would be dangerous/problematic due to overloading
 
So i was wondering if it would be safe to buy a $300 SurgeX XF2 with 2 outlets, then take my "Tripp Lite PDUMV15" (16 outlets, not surge protected) and connect it to the SurgeX XF2 ?
Your question is about human safety and local code requirements. Only one in or knowledgeable of fire codes in your venue can answer that question.

You are asking about daisy chaining power strips. That is considered a risk to human safety. Some venues aggressively enforce that code. Others don't care. Spend money for a SurgeX designed to safely meet your needs.

Meanwhile, one wire completely bypasses SurgeX protection. Can connect a surge directly to your appliances. SurgeX is typically for surges that do not do damage.
 

Reply to PDU connected to SurgeX XF2 surge protector = safe ? in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Our farm has a main 200 amp panel in the barn which services the barn, an addition to the barn with an apartment, an herb-gardening facility, and...
Replies
12
Views
1K
Hi, I hope you are all doing well. I have original UK samsung, apple and Huawei plugs and would like to know which combination of plugging them...
Replies
3
Views
1K
I thought that I posted this in the DIY part of the forum but I believe I did not. I am sorry about that. I put in a 10' x 20' metal shed about...
Replies
2
Views
1K
Hi folks, new member here. I am a DJ/electronic music producer with basically zero experience in advanced electronics. I recently bought the...
Replies
6
Views
2K
I've been asked about providing inline surge protection for the UPS supplies in numerous network cabinets around our factory and I'm hoping...
Replies
10
Views
3K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock