Discuss Pir lighting circuit.. help!! in the Commercial Electrical Advice area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

Even if you do not need a key switched permanent line at the PIR you can just use the PIR as a junction point for that core and carry it on to the EM fittings. You can also loop the PL at the non EM fittings in the same way if you need to.
If the EM lights do not need switched line from the PIR (dependent on type of fitting) then do the same with the switched line.
Always run the cpc to each point of connection.
Pir lighting circuit.. help!! EM lights and PIR switchin - EletriciansForums.net
 

Reply to Pir lighting circuit.. help!! in the Commercial Electrical Advice area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock