Prysmian Cable In a Box cr!p

[dksanders]

Anybody successfully managed to use a box of Prysmian T&E boxed cable? They don't tape the end of the cable to the outside of the box so you have to fish for it which usually ends up destroying the box. Anybody know how to do it?

 

[D00DY_T00DY]

Cant beat rack-A-tiers if you have lots of drums to pull at the same time.

Bloody hell you won something? Like £70 for two bits of plastic

 

[D00DY_T00DY]

Dood Buddy, wash your mouth out. We're all pro's, we'd never think of doing rough things like that.

Give over.
How do you store your cable? Tape it up everytime you pop it back in the van?

 

[D00DY_T00DY]

Used to use scaffold outside

Used any old bit of metal for swa. One side on a hop up one lifts other pulls..

Up To a certain size of course. Not Hercules

 

[Specialist]

Give over.
How do you store your cable? Tape it up everytime you pop it back in the van?

That's what you use the clips for.

 

[D00DY_T00DY]

That's what you use the clips for.

Yeah but you don't keep all your cable on the cable stand?! That's just madness

 

[Specialist]

No mate, get a couple of sizes of croc clips & just use them to clip the cut end of your cable to the roll, lay the rolls flat in the van & rarely have unravelled cable. Takes seconds and works well.

 

[Dave OCD]

I've always just tucked the end of the cable under a couple of coils on the drum then pull it tight for storage in the van, never had a problem.

 

[MisterE]

I find the folding cable holder (with the croc clips) a bit unwieldy so only get it out when I need to pull multiple cables.
Anyone know off a good single drum cable holder? (or suggestions for a good design when I get time to put one together)

 

[Dave OCD]

For one reel only or two at a push an old lawnmower roller works well mounted on a simple metal frame.

 

[Specialist]

Old style BT cable stand, often cheap on the bay.

 

[stummish]

To get the cable out of prysmian boxes:

Get finger/snipe nose pliers into box and rotate the drum to find the end. Fail a few times. Sit and have cup of tea (essential step, don't skip!). Try again and rip the box a little. Give up and undo sellotape lid. Get end out. Pull 5m and wait for drum to jam. Cup of tea. Yank on cable and rip box. Pull cable off drum and wrap it round yourself to make a catwalk style designer dress. Set fire to box and drum (make sure you get hot works permit first!). Go buy a proper drum of cable and some cable racks. Weigh in prysmian dress while crying at the loss of cash. Have cup of tea and rethink your life.

I think that sums it up.

 

[D00DY_T00DY]

To get the cable out of prysmian boxes:

Get finger/snipe nose pliers into box and rotate the drum to find the end. Fail a few times. Sit and have cup of tea (essential step, don't skip!). Try again and rip the box a little. Give up and undo sellotape lid. Get end out. Pull 5m and wait for drum to jam. Cup of tea. Yank on cable and rip box. Pull cable off drum and wrap it round yourself to make a catwalk style designer dress. Set fire to box and drum (make sure you get hot works permit first!). Go buy a proper drum of cable and some cable racks. Weigh in prysmian dress while crying at the loss of cash. Have cup of tea and rethink your life.

I think that sums it up.

Can just imagine a customer walking in on you completely tangled in cable.
Tea all over the place.
"Its happened again! Help"

 

[stummish]

@D00DY_T00DY it happens way more than it should... maybe I need to stop buying prysmian. Or better yet get more understanding customers who aren't so bothered about so called "unprofessional attitude" or "fire damaged"

 

[sparkdog]

I likes Prysmian cable too, good quality. Gave up on the box.