Wetroom Store - Network Wetroom Suppliers
This official sponsor may provide discounts for members

Discuss Question about BS EN 12101-6:2005, art. 11.6.3 in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

The article 11.6.3 states the requirements for electrical cables used in
pressure differential systems:
a) fire-resisting cables meeting the temperature and time criteria in accordance with Table 7 or
b) enclosed with fire-resisting construction, or installed external to the building where the cables cannot be endangered by fire, and
c) cables protected from fire shall comply with the classification temperature/time of the component that they serve.

I'm reading again and again and I'm still not sure if the conditions should be met as follows:
1. ( a or b ) and c
2. a or ( b and c )

Please help.
 
Wetroom Store - Network Wetroom Suppliers
This official sponsor may provide discounts for members
  • Thread Starter Thread Starter
  • #3
You must be logged in to see the message.
 

Matthewd29

-
Arms
Esteemed
You must be logged in to see the message.
 
Instyle LED Lighting Specialists UK
This official sponsor may provide discounts for members

Reply to Question about BS EN 12101-6:2005, art. 11.6.3 in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Aico 3000 Range
This official sponsor may provide discounts for members
Top Bottom