Quickly watch wacthdog now

[driverman]

you wont believe it

 

[Octopus]

I'll have to view in on Iplayer

 

[driverman]

Electrical work being carried.out..hidden cameras . i like the temp light lead!!!!!

 

[applemac]

theres hundreds like him, good job we have part p!

 

[Adam W]

I didn't see the first bit but saw the follow-up - was he using a standard light bulb as a drummond lamp?

 

[robd]

Wasn't really feeling it until he connected his light into the main fuse so he could see to work on the cu!

 

[Barry White]

from above progremme
"I had to make a judgement call either to work in the dark or connect the temporary lamp to the cutout" FFS he had a torch in his pocket.
I do however remember the DNO guys connecting a wolf drill to the incommer with clips to drill holes for the meter board. this was before battery drills though.

 

[Darkwood]

Watchdog overplaying it at beginning but the shoddy work and lack of testing + the light bulb with a 400amp ish fuse protection are a classic then to say watchdogs Electrical expert doesn't know what he's talking about is an exiting laugh... Flash!!!!!!!!!!

 

[varilite]

It worked though

 

[stevethesparks]

As in a similar thread regarding this programme;
I was astonished that the so called expert was able to maintain his hidden position, and not put a stop to this idiot going any further once he started poking his lamp direct into the cut-out.
This in my opinion made a normally enjoyable "Rogue Traders" as bad as the perpetrator himself.